Factor V-1250 Owner's Manual

Manual is about: FACTOR V-1250 Professional 12 Channel Amplifier

Summary of V-1250

  • Page 1

    V-1250 professional 12 channel amplifier premium audio video and power products owners manual info@factorelectronics.Com www.Factorelectronics.Com.

  • Page 2

    Important note: this owner's manual is provided as an installation and operating aid. Factor electronics does not assume any responsibility as to its accuracy and shall not be liable in tort or contract for any direct, consequential or incidental loss or damage arising from the installation, use or ...

  • Page 3

    Introduction: congratulations and thank you for purchasing factor electronics products. The factor electronics “v” series amplifiers are designed and built to provide ultra reliable performance for professional background music, paging applications multi-room audio and surround sound. The factor ele...

  • Page 4

    Diagram a connections and controls info@factorelectronics.Com www.Factorelectronics.Com.

  • Page 5

    Front panel operations and connections 1. Power switch- the power switch applies power to the amplifier and also activates the power standby mode. The amplifier will be in standby mode and ready to play music in any zone while minimizing ac current draw when not in use. It is possible to leave the a...

  • Page 6

    Rear panel operations and connections 1. Speaker terminals- connect your speaker wires here using good quality stranded copper speaker wire minimum 16 – 12awg. When the amplifiers are in normal mode you can safely connect one or two 8ohm speakers to each speaker terminal. When connecting two 8ohm sp...

  • Page 7

    Rear panel operations and connections: 5. Bus line in jacks- connect an input source to the bus line in jacks. Now select which amplifier channels will broadcast the bus line in source by selecting either left or right or aux using the source selection switches provided on each amplifier channel. 6....

  • Page 8

    Info@factorelectronics.Com www.Factorelectronics.Com single source to six zones connections: this is an example of a single source setup providing music to six zones using factor electronics vc-150 volume controls in each zone to control local volumes..

  • Page 9

    Info@factorelectronics.Com www.Factorelectronics.Com single source to six zone connections plus microphone paging: this is an example of a single source setup providing music to six zones plus microphone paging to six zones. In this setup the volumes are controlled by the microphone pre-amp and the ...

  • Page 10

    Info@factorelectronics.Com www.Factorelectronics.Com six x-music sources to six zone connections: this is an example of six individual x-music ipod sources providing independent music to six zones with individual volume control using the factor electronics vc-150 volume controls. The stereo output o...

  • Page 11: V-1250 Specifications:

    Info@factorelectronics.Com www.Factorelectronics.Com v-1250 specifications: amplifier channels 12 independent amplifiers ac input voltage 120v/240v switchable amplifier type class a/b current @ vin=0 0.05a current @ auto/on/off 0.018a output power @ 8ohms 50 watts rms max output power @ 8ohms 55 wat...

  • Page 12

    Factor electronics v-series amplifier accessories contact information factor electronics #108, 19232 enterprise way surrey bc canada v3s 6j9 e-mail: info@factorelectronics.Com website: www.Factorelectronics.Com warranty factor electronics amplifiers are warranted to be free from defects in workmansh...