- DL manuals
- Factor
- Amplifier
- V-4120
- Owner's Manual
Factor V-4120 Owner's Manual
Summary of V-4120
Page 1
V-430 v-460 v-4120 v-4240 commercial mixer amplifiers premium audio video and power products owners manual info@factorelectronics.Com www.Factorelectronics.Com.
Page 2
Important note: this owner's manual is provided as an installation and operating aid. Factor electronics does not assume any responsibility as to its accuracy and shall not be liable in tort or contract for any direct, consequential or incidental loss or damage arising from the installation, use or ...
Page 3
Introduction congratulations and thank you for purchasing factor electronics products. The factor electronics “v” series mixer amplifiers are designed and built to provide ultra reliable performance for professional background music and paging applications. All factor electronics amplifiers feature ...
Page 4
Quick start guide diagram a 2 connect a transformer coupled 70v speaker to the c and 70v terminals 3 after all your connections are made plug the ac power cord in 4 after all your connections are made press the power switch on 1 connect a hand held music player to the mp3 jack 6 adjust the master vo...
Page 5
Front panel operations and connections input 1- this controls the level of input 1 in the overall mix. A good level to begin with is the 12:00 position. Then adjust to achieve the desired level. Aux – this controls the level of the front panel mp3 input and the back panel aux input. Note: i pods and...
Page 6
Front panel operations and connections info@factorelectronics.Com www.Factorelectronics.Com power - the power switch applies power to the amplifier. The power switch is also part of the protection circuitry of the amplifier. If the amplifier is overloaded it will automatically shut down to protect t...
Page 7
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections note: rear panel color coding green = input red = output input 1 input 1 is a priority input. This input functions the same as the other input channels but offers some added features suitable for paging microp...
Page 8
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections vox sens – this rotary control adjusts the sensitivity of the override circuit. Turning the vox sens control clockwise triggers the auto sensing circuit on weaker input signals. Turning the vox sens control co...
Page 9
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections dip switch 3-100hz hpf - with this switch on all frequencies below 100hz will be cut at 18db per octave. Use this switch with microphones to roll off unwanted low frequency rumbles and minimizes pops from mout...
Page 10
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections remote mute – the mute contacts can be used to instantly mute background music sources for immediate paging or emergency situations. Simply short the mute contacts with a switch or external contact closure fro...
Page 11
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections sel contacts - shorting the sel terminals using a switch or external contact closure will combine the pre-amp signals in both the amplifiers and multiple amplifiers. We recommend using the v-rmc wall plate swi...
Page 12
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections v-rvc - all factor electronics amplifiers provide the unique v-rvc input. This is an rj45 female jack that allows the connection of up to three v-rvc remote microphone/line mixers. This feature can provide up ...
Page 13
Info@factorelectronics.Com www.Factorelectronics.Com diagram b v-rvc-pro/x-music connections cat5e cat5e cat5e set the priority switch down/on v-rvc-pro v-rvc-pro x-music use 2 conductor wire to connect the v-rvc-pro priority contacts to the amp mute contacts.
Page 14
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections speaker outputs – factor electronics v series amplifiers provide 4 speaker level outputs for the v-430 and v-460 and one speaker level output for the v-4120 and v-4240. Do not use more than one output at a tim...
Page 15
Info@factorelectronics.Com www.Factorelectronics.Com output power (rms) 30 watts 60 watts 120 watts 240 watts frequency response 50hz- 20khz 50hz- 20khz 50hz-20khz 50hz- 20khz total harmonic distortion power power power power signal to noise ratio, mic 67db 69db 70db 70db signal to noise ratio, line...
Page 16
All factor electronics v-series amplifiers are ctuvus listed factor electronics v-series amplifier accessories v-rvc-pro x-music v-rmc in-wall mic/line preamp in-wall ipod dock in-wall 5 room combiner contact information factor electronics #108, 19232 enterprise way surrey bc canada v3s 6j9 e-mail: ...