X-7240-4 four zonecommercial mixer amplifier premium audio videoand power products owners manual info@factorelectronics.Com www.Factorelectronics.Com.
Important note: this owner's manual is provided as an installation and operating aid. Factor electronics does not assume any responsibility as to its accuracy and shall not be liable in tort or contract for any direct, consequential or incidental loss or damage arising from the installation, use or ...
Introduction congratulations and thank you for purchasing factor electronics products. The factor electronics x-series mixer amplifiers are designed and built to provide ultra reliable performance for professional background music and paging applications. Factor electronics x-series amplifiers featu...
Quick start guide diagram a 2 connect a transformer coupled 70v speaker to the c and 70v terminals 3 after all your connections are made plug the ac power cord in 4 after all your connections are made press the power switch on 1 connect a music source to the aux input 6 adjust the master volume 5 ad...
Front panel operations and connections input 1- 4 these rotary knobs control the level of inputs 1-4 in the overall mix. A good level to begin with is the 12:00 position. Then adjust to achieve the desired level. Inputs 1-4 can be connected to dynamic microphones, condenser microphones or line level...
Front panel operations and connections info@factorelectronics.Com www.Factorelectronics.Com power - the power switch applies power to the amplifier. Output led's – the output led ladder displays the amplifier output level between on and overload. It's good practice to keep the output level below cli...
Note: rear panel color coding green = input red = output input 1 input 1 is a priority input. This input functions the same as the other input channels but offers some added features suitable for paging microphones. Priority means “override”. Simply stated the microphone or line level signal will ov...
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections 8 8 ac power inlet – connect the supplied ac power cord in here. Only use the supplied power cord or equivilent 14awg csa/ul approved power cord. Ac voltage selector – this slide connector changes the ac volta...
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections tel input – this is a balanced audio input that is designed to accept signals from an analog telephone output. Due to the varied output levels from different telephone systems we have provided a level control ...
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections 10 10 10
Info@factorelectronics.Com www.Factorelectronics.Com rear panel operations and connections expand the inputs – it is possible to expand the inputs of the x-7240-4 using the v-rvc-pro (remote mic/line mixer) and the x-music (in-wall ipod smart phone dock). The v-rvc-pro is capable of expanding the x-...
In an effort to constantly provide our valued customers with the latest advancements in technology, factor electronics specifications are subject to change from time to time without notice. Info@factorelectronics.Com www.Factorelectronics.Com technical specifcations and warranty 12 12 contact inform...
