Fagor CNC 8060 LASER Original Instructions Manual - page 7
CNC 8060/70 LASER
- 7/12 -
SOFTWARE DESCRIPTIONS
SOFT OPEN SYSTEM (8070 CNC only)
The CNC is a closed system that offers all the features needed to machine parts. However, sometimes, specific customers use third-
party applications for taking measurements, doing statistics or running other tasks besides machining a part.
This feature must be active when installing this type of applications, even if it is an Office file. Once the application has been installed, it is
recommended to close the CNC back in order to prevent the operators from installing other kinds of applications that could slow the
system down and affect the machining operations.
SOFT THIRD PARTY CANOPEN
Enables the use of CANopen non-Fagor modules.
SOFT FVC UP TO 10 m3 (8070 CNC only)
SOFT FVC MORE 10 m3 (8070 CNC only)
5-axis machines are usually used to make large parts. The accuracy of the parts is limited by the machine manufacturing tolerances and
by the effect of temperature while machining.
In industries like aerospace, the machining demands render the classical compensation tools insufficient.
Volumetric compensation FVC comes in to complement the machine adjusting tools. By mapping the total work volume of the machine,
the CNC knows the exact position of the tool at all times. After applying the necessary compensations, the resulting part has the desired
accuracy and tolerance.
There are 2 choices depending on the size of the machine, up to 10 m3 and over 10 m3. This feature is only available on the 8070 CNC
model.
This feature requires a MP-PLUS (High level Processor).
SOFT GAP CONTROL (Standard on all models)
Functionality that makes it possible to maintain a set distance between the laser nozzle and the surface of the sheet (GAP).
The CNC is in charge of compensating for the existing undulations on the surface of the sheet to ensure the optimal positioning of the
laser nozzle at all times.
SOFT PWM CONTROL
This feature is only available with Sercos drive system bus. Aimed mainly at Laser machines for cutting very thick sheet metal.
The CNC generates a series of PWM pulses to control the power of the Laser when drilling the starting point. This feature is a must for
cutting very thick sheet metal and requires two quick outputs available at the module "SER-CAN-8I-8IO-A (83700065)" of the central unit
of the CNC 8070.
With this new feature, the OEM does not need to install external devices and programming them, thus reducing the cost of the machine
and installing time. The end user also benefits because the "Cutting with PWM" feature is much easier to use and program.