Summary of Combi BI60
Page 1
Cooling business group 1 installation directions.
Page 2
Cooling business group 2 handbook for the carpenter before the installation- combi bi60 needed pieces for the bi60 installation installation brackets (2 units) adjustment screws and nuts (4 units) crossing sets (4 units) attaching brackets (6 units) hinge’s cover set (4 units).
Page 3
Cooling business group 3 handbook for the carpenter before the installation- combi bi60 1. Check the pieces you need for the installation 2. If the plinth of your kitchen is higher than 4 inches, elevate the fridge 1 inch. This operation will help you in the instalation and the adjustment of the pan...
Page 4
Cooling business group 4 handbook for the carpenter before the installation- combi bi60 change the opening direction of the doors 1. Top door 1. The top hinge is right at the bottom left 2. The bottom hinge is right at the top left 2. Bottom door 1. The top hinge is right at the bottom left 2. The b...
Page 5
Cooling business group 5 handbook for the carpenter attach the panels - combi bi60 place the adjustment screws and nuts 1. Place the adjustment screws at the top part of the fridge’s doors. It is important to adjust the screws in order to leave 1/5” between the door and the regulation nut. (see the ...
Page 6
Cooling business group 6 handbook for the carpenter attach the panels - combi bi60 preparation of the furniture panels: place the template carefully at the back side of the door 1. Bottom door: place the template taking as your reference the high part of the panel. (marks number 1) 2. Upper door: pl...
Page 7
Cooling business group 7 handbook for the carpenter attach the panels - combi bi60 preparation of the furniture panels: attach the installation brackets and the furniture panels freezer 1. Place the installation bracket at the back side of the panel, use the marks made with the template to place it ...
Page 8
Cooling business group 8 handbook for the carpenter attach the panels - combi bi60 preparation of the furniture panels: crossing sets. Place the fittings carefully in the installation bracket. Important: place the metallic and plastic pieces as are shown in the picture.
Page 9
Cooling business group 9 handbook for the carpenter attach the panels - combi bi60 panels installation procedure: 1. Step 1: freezer 2. Step 2: fridge place and adjust the panels: 1. Place the panel, introduce the adjustment screws in the crossing sets. 2. Introduce the adjustment nuts in the adjust...
Page 10: Adjustment Of The Panels:
Cooling business group 10 1 2 2 handbook for the carpenter attach the panels - combi bi60 adjustment of the panels: 1. Align with door 1. Align the bottom of the door of the refrigerator with the wooden furniture with: adjustable feet with screws or brackets 2 2. Horizontal and vertical alignment of...
Page 11
Cooling business group 11 handbook for the carpenter attach the panels - combi bi60 lock and final union of the refrigerator and the panels once the panels are properly adjusted, lock the panels with the attaching brackets.
Page 12
Cooling business group 12 handbook for the carpenter attach the panels - combi bi60 fridge – appliance’s attachment 1. Place the fridge in the final position 2. Attach the hinges to the sides..
Page 13
Cooling business group 13 handbook for the carpenter attach the panels - combi bi60 final attachment 1. Once the appliance is in the proper place assure it to the side panels and/or walls ..