1. DL manuals
  2. Fairbanks
  3. Scales
  4. 1124
  5. Manual

Fairbanks 1124 Manual

Manual is about: Portable Platform Scale

Summary of 1124

  • Page 1

    Installation manual portable platform scale models: 1124 & 1124-1 50595 revision 6 — 03/13 © 1988-2013 by fairbanks scales inc. All rights reserved.

  • Page 2: Amendment Record

    Amendment record portable platform scale 1124 & 1124-1 50595 manufactured by fairbanks scales inc. 821 locust kansas city, missouri 64106 created 6/88 issue #1 6/88 issue #2 5/01 updated assembly instructions and part numbers. Issue #3 11/09 revised assembly instructions. Revision 4 08/10 added info...

  • Page 3

    Table of contents section 1: introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 section 2: description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 section 3: installation a. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4: Section 1: Introduction

    This manual provides information on installation, adjustment, and parts list for the model 1124 and 1124-1 portable platform scales. Please read carefully while assembling the scale. The scale is factory calibrated and supplied ready to be assembled and placed into service. For commercial applicatio...

  • Page 5: Section 2: Description

    The 1124 and 1124-1 portable platform scales are constructed with cast iron bases and cast iron lever systems. The indicating devices are a mechanical beam (in lbs. Or kgs.) or, with accessories, an electronic instrument for displaying the weight note : the 1124's shipping weight is approximately 18...

  • Page 6: Section 3: Installation

    A. Unpacking: check that all parts are included using the packing list. Check for component damage that may have occurred during shipping. B. Assembly: caution: the scale base assembly, as shipped, weighs 105 lbs., use caution when lifting. 1. Wheel and pillar assembly note: the descriptions below r...

  • Page 7

    H. Screw the two (2) pillar rods (#1) into the base in the two (2) tapped holes provided. I. Place the pillar (#2) over the pillar rods with the cutouts facing to the left and right of the platform j. Insert the beam load rod (#35) down through the pillar, with the bent hook on top, loose swivel hoo...

  • Page 8

    Beam load rod (the open part of the 'hook' on the bottom should face the scale base (inward). I. Holding the rod's bottom hook, put it under the pivot on the end of the scale lever by lifting on the long lever end from the bottom. J. Fit the beam lock (#43) over the beam tip and align with the 2 hol...

  • Page 9

    Q. If the beam will not balance using the balance ball : • check that the poise is at "0" and the poise screw is snug. • check that the platform is 'free' and 'floating'. • check that the beam load rod is connected properly on both ends. • check that there is nothing under the platform inhibiting th...

  • Page 10

    3. Operation: a. Zeroing: before weighing an object, ensure that the scale is on zero with nothing on the platform. To do this, set the sliding poise to "0", release the beam lock, and observe the beam within the beam lock loop. (the beam should move from near the top to near the bottom eventually s...

  • Page 11

    03/13 11 50595 rev. 6 this page intentionally left blank..

  • Page 12: Section 4: Parts

    A. 1124 (lbs) item no. Part no. Description 1 71622 pillar rod, long 2 58933 pillar 3 95847 platform cover 4 95848 frame 5 95855 cotter pin 6 58937 bearing, platform 7 95856 screw, phillips head 8 95857 screw allen 9 95858 level, bubble 10 95859 pin, corner loop 11 71623 loop, corner 12 71624 bearin...

  • Page 13

    A. 1124 (lbs) 03/13 13 50595 rev. 6 80 100 90 40 50 60 70 10 2 46 43 49 55 56 57 3 6 5 10 11 33 13 12 17 18 19 16 45 44 39 1 2 35 7 9 8 4 14 15 25 54 26 24 31 34 61 62 52.

  • Page 14: Section 4: Parts -

    B. 1124-1 (kg) item no. Part no. Description 1 71622 pillar rod, long 2 58933 pillar 3 95847 platform cover 4 95848 frame 5 95855 cotter pin 6 58937 bearing, platform 7 95856 screw, phillips head 8 95857 screw allen 9 95858 level, bubble 10 95859 pin, corner loop 11 71623 loop, corner 12 71624 beari...

  • Page 15

    B. 1124-1 (kgs) 03/13 15 50595 rev. 6 80 100 90 40 50 60 70 10 2 46 43 49 55 56 57 3 6 5 10 11 33 13 12 17 18 19 16 45 44 39 1 2 35 7 9 8 4 14 15 25 54 26 24 31 34 61 62 52.