Fairchild FSAM50SM60A Manual
©2006 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
FSAM50SM60A Rev. C4
FSAM50SM60A Moti
on
SPM®
2 Series
January 2014
FSAM50SM60A
Motion SPM
®
2 Series
Features
• UL Certified No. E209204 (UL1557)
• 600 V - 50 A 3-Phase IGBT Inverter with Integral
Gate Drivers and Protection
• Low-Loss, Short-Circuit Rated IGBTs
• Very Low Thermal Resistance Using Al
2
O
3
DBC
Substrate
• Separate Open-Emitter Pins from Low Side IGBTs
for Three-Phase Current Sensing
• Single-Grounded Power Supply
• Optimized for 5 kHz Switching Frequency
• Built-in NTC Thermistor for Temperature
Monitoring
• Inverter Power Rating of 4.0 kW / 100~253 VAC
• Adjustable Current Protection Level via Selection
of Sense-IGBT Emitter's External Rs
• Isolation Rating: 2500 V
rms
/ min.
Applications
•
Motion Control - Home Appliance / Industrial Motor
Resource
•
AN-9043 - Motion SPM® 2 Series User's Guide
General Description
FSAM50SM60A is a Motion SPM
®
2 module
providing a fully-featured, high-performance inverter
stage for AC Induction, BLDC, and PMSM motors.
These modules integrate optimized gate drive of
the built-in IGBTs to minimize EMI and losses, while
also providing
multiple
on-module protection
features including under-voltage lockouts, over-
current shutdown, thermal monitoring, and fault
reporting. The built-in, high-speed HVIC requires
only a single supply voltage and translates the
incoming logic-level gate inputs to the high-voltage,
high-current drive signals required to properly drive
the module's internal IGBTs. Separate negative
IGBT terminals are available for each phase to
support the widest variety of control algorithms.
Package Marking and Ordering Information
Device
Device Marking
Package
Packing Type
Quantity
FSAM50SM60A
FSAM50SM60A
S32CA-032
Rail
8
Figure 1. Package Overview