Fairhaven RD500 User Manual - 4.9
the receiver to automatically set a step size that is appropriate to the mode that is being
used, for example:
SSB Modes – Step size = 5Hz
NBFM
- Step size = 12.5kHz
AM
- Step size = 100Hz
If a band is programmed (see 4.17), any step size can be set for each individual band.
Step size menu
Step Size = Normal
4.9
Time clock.
The receiver’s time clock display gives the current time in hours minutes and seconds
and the date and month. It also provides a means of timing the receiver to switch on
and off, to record up to 4 programs or events up to one year ahead and with an setting
accuracy of one second. It also has a sleep timer which can be programmed to turn the
receiver off automatically.
reveals the setup screen.
1. mode 2. set 3. Timer
4. activate timer
a. Clock display mode.
Key 1 gives the clock display menu. Pressing key 1 on this menu sets the time display
format, which can be either 12 hour format with an am/pm indication or 24 hour
format. Key 2 allows the date and month to be swapped according to the format that
you are used to.
Clock display format menu
1. Time= 24hour Format
2. Date=MM/DD Format
b. Setting the clock.
Press enter to return to the main clock display and press key 9 then key 2 (set) to set
the clock display. The cursor can be moved along the display and the time and date
can be set by use of the numeric keys, in 12 hour format the am/pm indication is
changed with key 2 (a) and key 7 (p). The clock is halted until enter is pressed to allow
synchronisation to a known time standard.