Fairphone case - manifesto instruction manual 3d hubs.
Front back sides bottom 3d hubs fairphone case printing set up these instructions are meant as a guideline for printing fairphone cases. We experienced the best results with the following settings in makerware for our replicator 1, 2 and 5th gen. These settings are meant as guidelines. You may tweak...
Additional tips & tricks additional tips: • print the object vertical, this will improve the printing of details. • in the expert settings, use a minimal brim line amount of 5 lines. • slow is good - slow printing provides better results, especially at the top of the casing post treatment: • remove ...
Shipping instructions 3d hubs item list: small box • scissors • wrapping paper • tape • label seal • ups label • fairphone case fold the shipping label without hiding any info make sure the courier can scan the label check the order page for instructions about calling a ups courier stuff the box wit...
