Fakir 2150 Watt User And Care Manual - page 10
08
1) Temperature
regulation control
2) "Iron heating"
indicator light
3) Steam request
button
4) Continuous steam
jet button
*Using the iron, optional
Universal brush (E)
When cleaning glazed surfaces, if the weather
is particularly cold pre-heat the glass working
at distance of about 50 cm away from the surface.
To take care of your plants, we recommend
spraying them from a distance of at least
50 cm.
It is advisable to use this brush to clean large surfaces, tiled
or marble covered floors, parquet, carpets etc., using the
following inserts supplied with it.
• Bristle inserts (E2), for use when vacuuming only.
• Liquid suction inserts (E3), to pick up liquids; recommended
for smooth surfaces.
• Fitted carpet inserts (E4), suitable for fitted and loose
carpets.
The universal brush can be connected directly to the handle,
or to the hose by means of the extension tubes (D).
Assembling inserts:
To change the inserts, slide out the insert from its position
on the brush and slid in the replacement (Fig.C).
When assembling the inserts for suctioning up liquids (E3),
take care to ensure that their SMOOTH side faces inward.
Steam-suction accessory (K)
Use this accessory to clean areas that are difficult to reach
with other accessories. This accessory may be used for:
• treating stains on carpeting or loose carpets, before going
over them with the brush;
• cleaning stainless steel, windows, mirrors, layered coating
and paintwork;
• cleaning corners such as stairs, windows frames, door
jambs, aluminium sections;
• cleaning the bases of taps;
• cleaning blinds, radiators, the interiors of cars;
• atomising house plants from a distance.
This accessory can also be fitted directly onto the handle
(A2) or it can be connected to the hose by means of the
extension tubes (D). It is possible to combine this accessory
with the small coloured brushes (L)
Small steam-suct›on upholstery nozzle (N )
We suggest to use this accessory on large windows,
large mirrors and smooth surfaces, or to clean
upholstery surfaces such as sofas, mattresses, etc.,
using the following attachments supplied with it:
• 200 mm squeegee attachment (O1) for large
windows and surfaces;
• bristle attachment (P) is recommended for carpeting,
stairs, car interiors, and upholstered surfaces (AFTER
TESTING FIRST ON A HIDDEN PART,
WAITING AND SEEING HOW IT REACTS TO
STEAM TREATMENT).
It is also useful for removing animal hair from the
same surfaces; a sponge cover (E5) may also be
attached to the nozzle. Fit the attachments and slide
them onto the nozzle as shown in fig.D. To correctly
use the steam-suction squeegee proceed as follows:
• apply steam uniformly to the surface to be cleaned
to dissolve the soiling.
• Press the rubber squeegee against the surface to
be cleaned, moving it vertically from top to bottom
with the suction function switched on.
Warning:
in particularly cold weather, pre-heat
windows by applying steam from a distance of about
50 cm from the surface to be cleaned.
Magic Steam Vac Basic can be quickly transformed
into a highly effective ironing system to make ironing
quick and easy. Simply connect the product to the iron
accessory
• Connect the iron to the monobloc plug (B2) proceeding
as shown in the “Operation” paragraph.
• For STEAM ironing, turn the dial (1) and set the iron
temperature to its maximum travel on the “COTTON-
LINEN” steam position. YOU MUST SET AT ITS
MAXIMUM POSITION, DO NOT SET AGAINST
THE PICTURE OF THE IRON ON THE DIAL
(1).