Fakir GALAXY Instruction Manual - Overview
GB
OVERVIEW
15
Instruction for use
Basal operation
WARNING!
Never use a defective appliance.
NOTICE!
Keep the packaging for storage and future transports
(e.g. for moves, service).
• Before first use
,fill the kettle with clean water to maximum
capacity and boil
.Discharge the water and repeat the
process
.
• Fill the kettle with water to desired level
.Do not overfill or
there will be a risk of spillage or spitting
.The water level
indicator will assist you to measure the correct amount
.
You can fill the kettle via the spout or after opening the lid
.
Do not forget to close the lid after filling
,otherwise the
kettle will not automatically switch off after use
.
• Do not fill with less than 0.5 liters of water
(to “min”
indication
)to prevent the kettle running dry while operating
.Do not fill with more than 1.7 liters of water(to “max”
indication
).
• An automatic safety cut-out has been fitted for protection
against overheating
,it will operate if the kettle is switched
on when containing insufficient water
.Always ensure the
water inside the kettle covers the minimum mark on the
water level indicator gauge
.If the automatic safety cut-out
has operated
,switch the kettle off,disconnect from the
power outlet and allow the kettle to cool down for 5 to 10
minutes
.The refill with and switch on,the kettle will work
as normal
.
• Put the base on the dry , smooth and horizontal plane ,
insert the plug to the socket .When the kettle was inserted
into the base , the power puts through automatically
.
• Press the “ ” key shortly,with the sound “di.”, it starts
running.
• After the water boils,indicator turns off and the buzzer
sends out a group “di”sounds at the same time.