Fakir STIMA Instruction Manual - page 11
putting a damp cloth between the iron and
the fabric. To avoid staining, do not use the
spray on silk or synthetic fabrics.
CLEANING
Note: Before cleaning the iron in any way,
make sure that the appliance plug is not
connected to the socket.
Any deposits, starch residue or size left on
the plate can be removed using a damp
cloth or an unabrasive liquid detergent.
Avoid scratching the plate with steel wool
or metallic objects.
The plastic parts can be cleaned with a
damp cloth then wiped over with a dry cloth.
SELF-CLEANING
The self-cleaning feature cleans inside the
plate, removing impurities. We recommend
using it every 10-15days. Directions:
•
Fill the reservoir up to the maximum level
indicated and set the steam selector
•
Set the thermostat knob to the maximum
temperature and wait for the light to turn
off.
•
Pull the plug out of the socket and hold the
iron horizontally over the sink.
•
Hold the self-clean button setting until all
the boiling water, steam, impurities come
out.
•
When the soleplate has cooled down, you
can clean it with a damp cloth.
HOW TO PUT IT AWAY
•
Disconnect the plug of the iron from the
socket.
•
Empty the reservoir by turning the iron
upside down and gently shaking it.
•
Leave the iron to cool down completely.
•
Roll up the power cord with the rewinder.
•
Always put the iron away in a vertical
position.
ADVICE FOR GOOD IRONING
We recommend using the lowest
temperatures with fabrics that have unusual
finishes (sequins, embroidery, flush, etc.).
If you don’t know the composition of the
fabric, determine the suitable temperature
by testing on a hidden corner of the
garment. Start with a low temperature and
increase it gradually until it reaches the
ideal temperature.
To avoid marking silk, woolen or synthetic
garments shiny, iron them inside out.
To avoid marking velvet garments shiny,
iron in one direction (following the fibre)
and do not press down on the iron.
Many fabrics are easier to iron if they are
not completely dry.
For example, silk should always be ironed
damp.
Specifications:
Power consumption
: 2200 Watt
Voltage
: 230V~50 Hz
Motor
: AC
Protection class
: II
Usage life
: 7 years
06
There may be a little water in the water
tank. This is because we test all our Stima
Steam Iron 100% before you buy them, so
you get a quality product.