Fakir Trex dual Instruction Manual - Trex Dual
TREX DUAL
17
GB
NOTE!
The starting button of our appliance is 2 speed step; it
will operate slowly when you slowly press on the button,
and it will operate fastly when you hardly press on the
button.
Suggestions of use
• Before using, rinse the accessories of your appliance with
tepid water
Chopping:
• After removing the main body (motor) and transparent
intermediate cover from the bowl, place the doublesided
stainless steel blades, one on top of the other; and then
locate them onto its housing.
• Put any material to be chopped into the bowl (if large,
dividing into 2 or 3 pieces).
• Place the transparent intermediate cover onto its housing
over the bowl. This unit does not operate, unless the
transparent intermediate cover is located onto the bowl.
• Locate the main body /motor unit on this transparent
intermediate cover so that it can be inserted into the
slots. After ensuring that the main body is secured on the
transparent intermediate cover; connect the mains plug
to the wall socket and initiate the blades by depressing
the operation switch.
• If any non-chopped pieces are left after operation, mix
such materials with a spatula and try again.
• You can crash ICE thanks to the double-folded and
double-sided stainless steel blades of your chopper.
• After you have finished your work, immediately rinse the
bowl, transparent intermediate cover; and cutting blade,
and wipe dry them with a damp cloth.
• Before operating your unit, remove the seeds of those
fruits such as peaches, apricots, plums, etc., and peel
those dried frurts/nuts such as almonds, hazelnuts,
walnuts, etc.
• When using your unit do not fill the bowl up to the brim.
Follow the below max. quantity/amount indication.
• Never exceed the columns seen inside the bowl.
Maximum