FALCOM MAMBO2-B6 Hardware Manual - 4 Technical Data
MAMBO2-B6 H
ARDWARE
M
ANUAL
V
ERSION
1.0.4
4 TECHNICAL DATA
4.1 Product features
Input voltage:
➢
USB port voltage level: +5.0 V ± 10 % (max. 0,5A)
➢
Alternative max. +12 VDC for quick charging
Battery:
➢
Device is powered by a rechargeable 1650 mAh Li-Polymer battery
➢
Default operating time is user-application dependant
Power saving:
➢
4 different power saving modes - programmable with PFAL commands
Operating temperature range:
➢
-20 °C to + 60 °C (for more details, see chapter
4.1.2
)
Physical characteristics:
➢
Size (HxWxL): 86/103.0 ± 0.1 mm x 54.0 ± 0.1 mm x 26.0 ± 0.1 mm
➢
Weight:
ca. 108 gr
Physical Interfaces:
➢
OLED color display 128x128
➢
1 x 10pin Mini-USB port for battery charging and data transfer
➢
1 x SIM Card interface (for 1.8 and 3 V SIM cards)
➢
1 x Red LED indicator - free-programmable (in sleep or OFF mode it
indicates battery charging process)
➢
2 x Soft keys (Left and right key buttons)
➢
1 x 5-way navigation key
➢
1 x Hardware reset button
➢
1 x Built-in hands-free speaker
Operating Software:
➢
Embedded TCP/IP stack, including TCP, IP and SMTP protocols. SMTP
protocol allows sending of E-Mail via an internet mail server
➢
Accessible via PFAL commands
➢
Upgrade via USB and over the air (GPRS/TCP)
Data access/download:
➢
Direct USB connection e.g. laptop, PC:
✔
Bi-directional serial interface
✔
10pin mini-connector female (see
Table 6
for more details)
✔
Selectable baud rate (default 57600 bps)
✔
8 data bits, no parity, 1 stop bit, no flow control
➢
SMS for
two-way communication messages
➢
CSD dial-up data link
➢
TCP communication by GPRS-IP based packet transfer
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 14 of 28