Falcon 360-P User Manual - page 2
FALCON 360-P USER MANUAL
Version 1.2
Release Date: 29 Sep 2014
© 2014 Apex Flight Operations
Page 2 of 8
Introduction
Thank you for purchasing the Falcon 360-P – we have designed this system to provide efficient and
cost-effective tracking for your aircraft, as well as provide you with a tool for reliable
communication and data gathering during your flight operations.
The Falcon is essentially a system that gathers information from the aircraft, and requires very little
interaction from the flight crew. In normal installation and operation it will automatically track the
aircraft whenever the Avionics bus is powered.
This document describes the hardware functions, as well as installation options – for details on the
IndigoTrack Crew software application used to control the Falcon, please refer to the separate
IndigoTrack Crew User Guide.
System Components
The Falcon 360-P system consists of the tracking module which is mounted in a suitable position on
the glareshield, and a power cable which is connected to an auxiliary power supply in the aircraft.
Please refer to the Installation section for more information on installation options for the system.
The tracking module is illustrated below:
1
Alert Button
2
Antenna Button
3
Signal Button
4
Bluetooth Button
5
Power Button
6
Light Sensor
7
Power Connector
8
Data Port
9
Micro-USB Port
10 Antenna Connector
1
2
3
4
5
6
7
8
9
10