Falcon BT1311 Operation Manual - page 6
1
Appendix A
falcon™
Specifications
• T
h
e keyboard operation current is 2mA, and the LEDs current is 2mA. The battery is rated at
400 mA, and there is low battery protection. The keyboard will shut off automatically when
the voltage is below 3.0V.
• Generally, the keyboard will keep charge for 400mAH/2.6mA =153H (without LEDs) The
keyboard can stand by for a long period of time - 400mAH/4.5uA (more than 3000 days).
The keyboard keeps discharging with all the LED lit for 4 hours with 20 hours standby time.
This keyboard can be used heavily for approximately 19 days.
(400mAH/(2.6*2mA*4H_4.5UA*20H) ~=19 days. Turn off keyboard to conserve battery
power when not being used.
Item
Specification
Product Name
BT Keyboard with a falcon
TM
on board
Keys
105
Key Travel
1.6 mm
Key Touch
Soft tactile rubber dome
Dimensions
380 x155 x 12 mm
15”L x 6”W x ½”H
Weight
586 g
21 oz
Interface
Bluetooth ver. 2.0, 3.0 &4.0 (HID)
Frequency
2.4 Ghz
Battery Size
450mAh
Battery
Lithium Ion 3.7 V
Charging Interface
Micro USB
Operation Current (key & light)
~2.6 mA
Standby Current
~4.5 uA
System Requirements
Windows XP, Vista, 7, 8
Max OS X v10.5.8 or later
iOS 4.0 or later
Android 3.0 or later
Power Consumption
Working: MAX 30mA
Sleep: MAX 0.2 mA
Power Off: 20uA
Control Distance
10 M
US Patent No.
8803807
1
Appendix B
Certifications
B.1 Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
The product comply with the US portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user body
or set the device to lower output power if such function is available.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.