Falcon FALHDCP110BC Instruction Manual

Other manuals for FALHDCP110BC: Instruction Manual

Summary of FALHDCP110BC

  • Page 1

    Falhdcp90sc/-aus falhdcp110sc/-aus falhdcp90bc/-aus falhdcp110bc/-aus instructions manual.

  • Page 2: Index

    2 2 index recommendations and suggestions ......................................................................................................................3 characteristics..............................................................................................................................

  • Page 3

    En 3 3 recommendations and suggestions the instructions for use apply to several versions of this appliance. Ac- cordingly, you may find descriptions of individual features that do not ap- ply to your specific appliance. Installation • the manufacturer will not be held liable for any damages resulti...

  • Page 4: Characteristics

    En 4 4 characteristics dimensions 650 min. 898 - 1098 - 1198 490 240 100 15 0 4 0 205 21 0 min.495 max. 770 465 90 132 80 components ref. Q.Ty product components 1 1 hood body, complete with: controls, light, blower, filters 2 1 telescopic chimney comprising: 2.1 1 upper section 2.2 1 lower section ...

  • Page 5: Installation

    En 5 5 installation wall drilling and bracket fixing wall marking: • draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • draw a horizontal line at 650 mm above the hob for installation without the ba...

  • Page 6

    En 6 6 mounting the hood body • screw the two screws 12d supplied onto the brackets 7.1. • hook the hood body onto the bracket 7.1, centring it around the vertical line. • use the adjusting screws 12d underneath the hood to level the hood body. 12.D 7.1 connections ducted version air exhaust system ...

  • Page 7

    En 7 7 electrical connection • connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • remove the grease filters (see paragraph maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan...

  • Page 8: Use

    En 8 8 use 1 1 0 1 0 2 3 l m v l light switches the lighting system on and off m motor switches the extractor motor on and off v speed sets the operating speed of the extractor: 1. Low speed, used for a continuous and silent air change in the presence of light cooking vapour. 2. Medium speed, suitab...

  • Page 9: Maintenance

    En 9 9 maintenance grease filters cleaning metal grease filters the filters are washable at least every 2 months of operation, or more frequently for particularly heavy usage. • remove the filters one at a time, supporting them with one hand and turning the safety knobs (pull and turn). • wash the f...

  • Page 12

    436004414_ver2 the symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correct...