Falcon Prime 2 User Manual - System Setup
8
Video setup - Resolution setup
To start dual camera recording, only resolution option is:
“FHDP30+FHDP30”.
Must stop recording to get into menu screen
System setup
Press M button to enter main menu, go to SETUP menu and select desired
options via OK button. Return to main menu via RIGHT and LEFT button.
System setup options
Date/Time: Used to set Date and Time. Use Right, Left, and OK buttons to
change values and press Menu button to save.
Plate Number: Used to show License plate number of vehicles that may be
in the video. Shown on the video
Auto power off: Used to turn camera off after unit is first powered on. Off/1
minute/3 minutes/5 minutes
Beep sound: Turns key tone on or off.
Language: Used to select language: Chinese simplified/Chinese
traditional/English/French/Japanese/Russian/German/Italian/Portuguese/
Spanish etc.
Frequency: Used to clear frequency barriers that arrive. 50Hz/60Hz
TV mode:NTSC/PAL
Suggested NTSC
Format SD Card: Cancel/OK
This will erase every recording or photo taken even ones that are saved on
the card
Default setting: Restore default setting, Cancel/OK