Owner's guide addendum uninterruptible power system for models: sg1k-2t & sg1krm-2t sensaphone 1104 falcon® electric irwindale, ca 91706 tel. 626-962-7770 fax. 626 962-7720 the information contained herein is the property of falcon® electric, is proprietary, confidential, and not to be disclosed, di...
Important safety instructions save these instructions this manual contains important instructions which must be followed during the installation, operation and maintenance of this device and it’s batteries. Please read all instructions before operating this equipment and save this manual for future ...
Chapter 1 chapter 1 sg sensaphone option- overview this user’s guide addendum is provided as preliminary installation and interfacing instructions for your sg series ups incorporating a sensaphone 1104 remote telephone management system. This manual is to be used in conjunction with the sg series us...
Chapter 2 chapter 2 installation inspecting the equipment if any falcon ® equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier and file a claim for shipping damage. If you discover damage after acceptance, file a claim for concealed damage. To f...
Sensaphone port a connect sensaphone interface cable db-9 male here sensaphone port b connect sensaphone interface cable db-9 female here sg ups dip switches please refer to the sg owner’s manual for details sg ups rs-232 port do not connect sensaphone connectors here sg ups cooling fan do not block...
D. Connect the ups input power cord to the ups inlet located on the ups rear panel. E. Verify the ups output voltage dip switch setting match your local utility voltage. Refer to the sg owner’s manual for details. F. Connect the ups input plug to a nearby grounded receptacle. Never use an extension ...
Chapter 3 chapter 3 preliminary operating instruction gnd1 1 gnd2 gnd3 gnd4 2 3 4 c on off gnd5 5 not used temperature sensor sensaphone rear panel ups & interface cable connections gnd1 temperature sensor return 1. ---- temperature sensor signal gnd2 utility loss return (orange wire) 2. ---- utilit...
Ups outlet control (outlets 1 & 2 only) follow the instructions in the sensaphone x10 manual for details concerning the remote and local control of this function. Should you want to test this output control function while the ups is operating do the following: to turn on the ups outlets 1 & 2 depres...
Your falcon ® electric sg series ups is backed by one of the finest customer service teams assembled. Write, call, fax or email should you require technical assistance or service. For sensaphone 1104 technical support or repair issues please contact the manufacturer directly. Technical support conta...
