Falconeyes FT-200FA Instruction manual
IM1101_FT-FA_eng
E) Attentions
Instruction Manual
3
D) Specification
FT-FA Series
Studio Flash
FT-200FA / FT-300FA / FT-400FA
FT-600FA / FT-800FA / FT-1000FA / FT-1200FA
Since there could be high voltage inside the unit, please DO NOT
open or repair the unit yourself. If there is any defect, please contact
the experienced technician.
Avoid strong light directing to the photo sensor.
Please ensure the power is switched off after use.
Power Range
Modeling
Power Control
Guide No.(ISO100/m)
Recycle Time
Angle of Illumination
Color Temperature
Operating Voltage
AC 110-120 60Hz/AC 220-240 50Hz
Triggering
Accessories Included
Reflector,Power Cord, Sync Cord, Modeling Lamp
Optional Accessories
Softbox, Barndoor ,honeycomb , Color Filter Set, Snoot, Light Stand, Umbrella etc.
Model No.
400Ws
300Ws
600Ws
800Ws
1000Ws
1200Ws
FT-300FA FT-400FA FT-600FA FT-800FA FT-1000FA FT-1200FA
150W
150W
250W
250W
250W
250W
5500K - 5800K
≥55°
1/32~1, ( Stepless )
55
64
78
90
95
100
1~2s
200Ws
FT-200FA
150W
45
1~1.5s
1~2s
1~2s
1~4s
1~4s
1~4s
Photo Sensor, Sync Cord, Test Button
Do not remove the flash tube until the light is switched off for at least
10 minutes in order to avoid scald.
For better maintenance, if the unit has been triggered continuously 10
times in a short period please leave the unit dormant 2 minutes.