Falconeyes LPW-1156TD-AB Instruction Manual - page 2
B) Panel Diagram
A) Product Overview
1
2
Sony battery holder (SY)
LPW-1156TD series LED panel designed by Falcon Eyes Ltd. is equipped
with WiFi control function. With the smartphone apps, users can adjust the
color temperature and brightness of the light via their smart phones.The
aluminum housing provides strong protection to the light. Users can choose
SONY or Anton Bauer battery sockets. LED beads are with stable perfor-
mance, long lifespans and HIGH CRI of (~95Ra). Color temperature is
adjustable from 3000K - 8000K and there is a touchable LCD screen at the
back for users to adjust color temperature and brightness directly.
1.Aluminum housing 7.CCT knob / reset button 12.U-Bracket
2.color temperature 8.Switch 13. U-Bracket Base
3.USB receiver port 9.Fastening Knob 14.USB Receiver
4.Power socket 10.Brightness knob 15.Receiver cover
5.Fastening knob / Stand by button 16.RC-W01
6. Brightness 11.Power Socket 17.Indicating light
7
10
11
9
1
3
4
5
6
2
8
13
12
Ⅰ
、
Light control panel and USB WiFi receiver diagram
17
15
16
14
RC-W01
WiFi receiver
C) Operating Instructions
Anton Bauer battery
holder(AB)
1
2
3
7
8
4
5
6
9
10
11
12
13
14
15
16
Ⅱ
、
WiFi Apps operation
1.
Indicating light
2.
ID of lights
3.
Memory slot
4.
Light switch
5.
Brightness
6.
Color Temp.
7.
Save
8.
Delete
9.
Light Scan
10.
Back
11.
Color Temp. (3rd screen)
12.
Color Temp. adjustment area
13.
Pre-set color temp.
14.
Router setting
15.
Status display
16.
Brightness control
Fig
6
、
Fig
7
、
Fig
8
、
Fig
9
、
Fig
10
、
Fig
11
、
Fig
12
、
Ⅰ、
LPW-1156TD + RC-W01 Operating Steps
1. Please make sure the WiFi application is installed on mobile phone. You can download from our
website or scan the QR code on the first page of the manual to download the apps.
2. Plug in power cable and RC-W01 WiFi receiver. Switch on the light and the indicating light on
the receiver should have lighted up. Turn on the WiFi function on mobile phone and start to
connect.
①
Single Light mode: Search the WiFi network “LEDSxxxx” on your mobile phone and enter
password: candlehome to connect. Enter the WiFi app and the connected light should appear on
the control screen. (All RC-W01 receiver starts with the name LEDSxxxx and follow by 4 digits, e.g.
LEDS1234) (All RC-W01 receiver are pre-set with password : candlehome)
②
A router is needed for multi-lights connection. Enter WiFi connection of the smartphone
and connect to a password protected router as Fig6. Enter WiFi app and then 2nd control
screen as Fig7 and Fig8. Click to enter Router setting as Fig9. (IOS system to enter
router name first and then password). Please press the Reset button (CCT knob) at the back
of the LED light for 3 seconds. The RC-W01 indicating light will twinkle rapidly and please
release the button now. (Please also do the same procedure for other LED lights). After 5 - 20
seconds, the indicating light stops twinkling. Click on the WiFi app to search for the
connected lights as Fig10. (IOS system needs not to click the icon, connected lights will
be displayed automatically). Click the light ID to enter 3rd control screen for adjustment. For
Multi-lights adjustment, Click to choose specific lights as Fig10 or uppper icon to
choose all lights as Fig12. Then entering any one of the light to 3rd screen allows multi-lights
adjustment at one time. (Please start from the begining if connection fails.)
Fig1
、
Fig
2
、
Fig
3
、
Fig
4
、
Fig
5
、
Control panel
Connect LEDS5469
Enter password
Enter 2nd screen Click ID to enter 3rd screen
Click ID to enter
3rd screen
Connect
LEDS5469
Enter 2nd screen
Enter Router setting Enter password
Light control screen Control screen