Falconeyes TE-1200D Instruction Manual

Thank you for purchasing FalconEyes’ products.

For further details of our related products, please contact your 

local distributor or visit our webpage at www.falconeyes.com.hk

Thank you.

Please read this manual carefully before using this product.

Falcon Eyes Limited

3

FM1012_TE-D_eng

D) Specification

Instruction Manual

TE-300D / TE-400D / TE-500D 

TE-600D / TE-900D / TE-1200D

Power Range  

Modeling 

Power Control 

Guide No.(ISO100/m) 

Recycle Time  

Flash Duration(t: 0.5s)  

Angle of Illumination  

Color Temperature  

Operating Voltage

AC 110-120 60Hz/AC 220-240 50Hz

Triggering  

Accessories Included  

Reflector,Power Cord, Sync Cord, Modeling Lamp 

Optional Accessories       Softbox, Barndoor ,honeycomb , Color Filter Set, Snoot, Light Stand, Umbrella etc.

Model No.  

TE-D Series Studio Flash

400Ws

300Ws

500Ws

600Ws

900Ws

1200Ws

TE-300D

TE-400D

TE-500D

TE-600D

TE-900D TE-1200D

150W

150W

150W

250W

250W

250W

5300K - 5500K

≥55°

1/400-1/1100

1/32~1, (LED step 1.0-6.0)

55

64

70

78

90

100

0.5~1.5s

1~2s

1~2.5s

1~3s

1~3.5s

1~4s

E) Attentions

Since there could be high voltage inside the unit, please DO NOT open 

or  repair  the  unit  yourself.  If  there  is  any  defect,  please  contact  the 

experienced technician.

Avoid strong light directing to the photo sensor. 

For better maintenance, if the unit has been triggered continuously 10 

times in a short period please leave the unit dormant 2 minutes.

Please ensure the power is switched off after use.

Photo Sensor, Sync Cord, Test Button