FALMEC AISEC22B5SS User Manual - Operation

9

G

OPERATION

TWO BUTTON CONTROL PANEL

LIGHT - Switch A

Position 0: the light is off.

Position 1: the light is on.

SPEED - Switch B

This is used to start and set the speed of the motor, from 1 to 3, or with 

continuous speed variator, depending on the version.

LIGHT - C

Motor operation indicator light. 

FILTERS 

REMOVING AND REPLACING’S INSTRUCTIONS

H

1.  METAL FILTERS

To remove the metal grease-trapping filter, using the handle A until releas-

ing it from the guide. To reposition the filter, repeat the operation in the 

reverse order.

A

2.  CHARCOAL FILTERS

To replace the charcoal filters, proceed as follows: remove the metal filters 

as described above. The two filters located at the ends of the motor can now 

be easily accessed. 

To install the new fi lters see picture. 

In case of hood with the motor box the fi lter is located on the botton part of 

the motor box. 

To install the new fi lters see picture.

To order new charcoal fi lters contact the distributor/retailer.

VALID ONLY FOR ITALY: download the appropriate order form from: www.

falmec.com (access the assistance drop-down menu).