Famastil F-Power 2000W Instruction Manual - page 24
24
ENGL
IS
H
5
2
4
3
1
PARTS LIST
1. Heat gun
2. Ventilation slots
3. Heat control knob
4. Switch
5. Nozzle
To increase the temperature setting,
turn the heat control knob
(3) anti-clockwise.
To reduce the temperature setting,
turn the heat control knob
clockwise.
01
02
SETTING THE TEMPERATURE
PIC 1
To switch your heat gun on at the low
speed setting, press the switch (4) to
depress to position “I” (PIC 2).
To switch the tool on at the high speed
setting, set the switch (4) to position “II”
(PIC 3).
Note: Allow the element to heat up for a
few seconds before use. Initially, some
smoke may emit from your heat gun.
This is normal and will soon cease.
01
02
03
OPERATING YOUR HEAT GUN
To switch the tool off, set the on/off switch
(4) to position “0” (PIC 4).
PIC 2
PIC 3
PIC 4