Famastil F-Power Instruction Manual - page 20
20
ENGL
IS
H
OPERATING YOUR ANGLE GRINDER
SWITCHING ON AND OFF
To turn on, press the tab on the
button and slide it forward.
To turn off, press the rear flap of the
switch. A spring will cause it to turn
back to initial position.
FITTING THE DISC
Disconnect the plug from the
electricity supply. Ensure the guard is
fitted.
Place the inner flange (PIC 2) on the
spindle. Ensure it is located on the two
flats.
Place the abrasive disc on the spindle
and inner flange (PIC 2). Ensure it is
correctly located.
Fit the threaded outer flange (PIC 2),
making sure it is facing in the correct
direction for the type of disc fitted:
• For grinding discs, the flange is fitted
with the raised portion facing towards
the disc. (PIC 3 - A).
01
03
04
02
01
02
PIC 1
PIC 2
OUTER
FLANGE
DISC
INNER
FLANGE
SPINDLE
WARNING!
Once turned on, the
grinder will not turn off just
releasing the switch. Step
number 2 (above) must be
followed to turn off the machine.
TECHNICAL SPECIFICATIONS
Power:
750W
Capacity:
115mm (4.1/2”)
Speed :
11.000RPM
Measures:
27 x 11 x 7cm
Aproximated weight :
1,8Kg
Cord:
2m