Family Gard FG225 User Manual

Summary of FG225

  • Page 1

    Models fg225 fg250 important! Please read carefully and save. This user’s manual contains important information about your smoke alarm’s operation. If you are installing this smoke alarm for use by others, you must leave this manual—or a copy of it —with the end user. Fire safety tips follow safety ...

  • Page 2

    How to install this smoke alarm the parts of this smoke alarm follow these simple steps! 1. “open here” tab 2. Cover hinge 3. Test button 4. Power/alarm indicator tools you will need: • pencil • drill with 3/16” (5 mm) drill bit • hammer • standard flathead screwdriver 1. Hold base firmly and pull u...

  • Page 3

    3 weekly testing • never use an open flame of any kind to test this unit. You might accidentally damage or set fire to the unit or to your home. The built-in test switch accurately tests the unit’s operation as required by underwriters laboratories, inc. (ul). • if the alarm ever fails to test prope...

  • Page 4

    Agency placement recommendations nfpa 72 (national fire code) chapter 11 “for your information, the national fire protection association's standard 72, reads as follows:” “11.5.1 one- and two-family dwelling units.” “11.5.1.1 smoke detection. Where required by applicable laws, codes, or standards fo...

  • Page 5

    Limitations of smoke alarms smoke alarms have played a key role in reducing deaths resulting from home fires worldwide. However, like any warning device, smoke alarms can only work if they are properly located, installed, and maintained, and if smoke reaches them. They are not foolproof. Smoke alarm...