- DL manuals
- Famous Trails
- Metal Detector
- MD1023
- Owner's Manual
Famous Trails MD1023 Owner's Manual
Summary of MD1023
Page 1
1580 n. Harmony cr. Anaheim, ca. 92807 phone: (714) 701-9671 fax: (714) 701-9672 toll free: (877) 97-scope www.Famoustrails.Com md1023 metal detector owner’s manual.
Page 2
Thank you for choosing famous trails! Before you return your product to the store contact us first! We can help if you need any assistance! ¾ log onto www.Famoustrails.Com ¾ get answers to your questions, email our technicians, and more! ¾ call 1-877-97-scope , to speak to a famous trails representa...
Page 3
Quick start guide md1023 1. Make sure power is off. 2. Assemble the unit and install two 9v batteries (not included). 3. Turn the sens knob clockwise to power the unit. 4. Remove any metal objects away from the detector. Remove any jewelry. 5. Set mode to all metal. 6. Set sens to midrange (5). 7. Y...
Page 4
Guía rápida md1023 del comienzo 1. Cerciórese de que la energía esté apagada. 2. Monte la unidad y instale dos baterías 9volt 3. Dé vuelta a la perilla de sens a la derecha para accionar la unidad. 4. Quite cualquier objeto del metal lejos del detector. Quite cualquier joyería. 5. Fije el modo a tod...
Page 5
Contents assembling the detector---------------------------------------------------------- installing batteries------------------------------------------------------------------ controls and functions----------------------------------------------------------- operating instructions------------------...
Page 6
With your md1023 metal detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. The detector is versatile and easy to use. This unit has an auto ground balance used in disc and all metal modes. Features: z view meter - quite useful in a noisy area, where it is difficu...
Page 7
7 2. Unscrew the knobs on the searchcoil, then remove the knobs and the connector. Insert the stem and align the holes on the searchcoil bracket and the stem. Push the connector through the holes, then replace and tighten the knobs. 3. Wind the searchcoil cable around the stem and insert its plug in...
Page 8
8 2. Slide the left battery cover off in the direction of the arrow. 3. Place a 9v battery into the battery compartment matching the polarity symbols (+ and -) marked inside and reinstall the left battery cover. 4. Slide the right battery cover off in the direction of the arrow. 5. Place a 9v batter...
Page 9
9 high-traffic areas. Pay attention to traffic safety. Controls and functions 1. Sens - sensitivity control also used as power switch. Rotate clockwise (away from off) to turn on the power. When you rotate the sens from 0 to 10, the sensitivity is gradually increased. In general use, you can set the...
Page 10
10 5. Headphone jack - insert the stereo headphones’ 3.5mm(1/8”) plug into the headphone jack. 6. Disc/tone - associated with mode switch. When mode switch is in disc mode, you can rotate the control clockwise from 0 to 10 to discriminate between metals. Unit discriminates the metal type with differ...
Page 11
11 all metal- used to search for all kinds of metal objects. Used in general searching. In this mode, the unit will respond with a “di-di” tone to all metal. This mode cannot discriminate metal type. Discrimination (disc) - this mode can help you to search and discriminate the target type, based on ...
Page 12
12 1. If there is interference from similar metal detectors in your searching area, please lower the sensitivity. 2. If there is interference from electrical cable, tv, radio, or other electrical devices in your searching area, again, lower the sensitivity. 3. When searching in highly mineralized ar...
Page 13
13 society in your area. Z leave the land and vegetation as it was. Fill in any holes you dig. Z use your detector only in safe areas. Z dispose of any junk you find, only in approved areas. Do not leave it for the next treasure hunter to find. Care and maintenance your md1023 metal detector is an e...
Page 14
14.