Famous Trails MD9200 Instruction Manual - page 3
3
BATTERY INSTALLATION:
1) Use two fresh 9 volt alkaline batteries.
2) Do not mix old and new batteries or different types of batteries.
3) Open the right and left battery compartments (located under the control
housing) by pushing in the direction indicated by the arrows.
4) Place a 9 volt alkaline battery in each compartment and attach them to the
battery clips by matching the (+) and (-) symbols on the clips and on the
batteries. See Figure 1.
(Fig. 1)
ASSEMBLY:
1) Turn the lock collar on the stem counter-clockwise until it loosens.
2) Insert the second stem section and lengthen or shorten the stem so that when
you stand upright with the detector in your hand, the search coil is level with
–
and about 1 ½” to 2” above – the ground. See Figure 2.
(Fig. 2)
3)
Turn the stem’s lock collar clockwise to lock the two pieces together. See
Figure 3.