Fanimation Air Shadow FP815FS Owner's Manual - page 10
10
Installing the LK815OB
▲
WARNING
To avoid fire or shock, follow all wiring instructions
carefully. Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
CAUTION
Turning off wall switch is not sufficent. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and the
ceiling fan must be properly grounded as a precaution
against possible electrical shock.
1.
Locate accessory mounting plate on bottom of fan.
Figure 1
Figure 2
Figure 3
Figure 4
2.
Mount internal housing unit on accessory mounting
plate with 3 screws provided, in bag labeled “Housing to
Motor Assembly”.
3.
Install switch cup adapter on the internal housing unit
with 3 screws and 3 lockwashers provided.
4.
Locate white and blue wires labeled “FOR LIGHT”.
Connect white-to-white and blue-to-black wires with wire
nuts supplied.