1. DL manuals
  2. Fanimation
  3. Fan
  4. FP6225BL
  5. Owner's Manual

Fanimation FP6225BL Owner's Manual

Manual is about: The Camview Ceiling Fan

Summary of FP6225BL

  • Page 1

    Owner’s manual model no. Fp6225bl the camview ™ ceiling fan net weight 7.3 kg (16.08 lbs) read and save these instructions.

  • Page 2

    1. Limited lifetime motor warranty - if any part of your fan motor fails, due to a defect in materials or workmanship during the lifetime of the original purchaser, fanimation will provide the replacement part free of charge, when the defective fan is returned to our national service center. Proof o...

  • Page 3

    Table of contents unpacking instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 4

    This manual is designed to make it as easy as possible for you to assemble, install, operate, and maintain your ceiling fan unpacking instructions for your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all wiring outlet box and box connectors ...

  • Page 5

    5 electrical and structural requirements ceiling ceiling joists Ý[Ý outlet %r[ )ljxuh ʆwarning to avoid fire or shock, follow all wiring lqvwuxfwlrqv carefully. Any electrical work not described in wkhvh instructions shouldbedoneorapprovedbyaolfhqvhg electrician. Ceiling fan performance and energy s...

  • Page 6

    6 how to hang your ceiling fan 1. Securely attach the ceiling junction box acceptable for ceiling support into the building structure. (figure 2) 2. Securely attach the ceiling bracket to the ceiling junction box as shown. (figure 3) 3. Hook the motor assembly onto the ceiling bracket assembly as sh...

  • Page 7

    7 how to wire your ceiling fan - remote control ʆwarning check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until the blades is in place. Noise and fan damage could result. If you feel...

  • Page 8

    How to assemble your ceiling fan 8 3. Y secure the motor assembly onto the mounting ll u f e r a c slots on ceiling bracket assembly with the upward-clockwise, quarter-turn twist. (figure 3) 4. Secure the motor assembly onto the ceiling bracket assembly with four screws. (figure 4) note: this step i...

  • Page 9

    How to assemble the housing and blade holder 9 figure 1 figure 2 1. Remove the four screws in the motor assembly. Assemble the housing onto the motor assembly using the four screws and securely tighten. (figure 1) 2. Assemble the blade arm with holder assembly to wkhprwrudvvhpeo\xvlqjwkhÝ[ppvfuhzv )...

  • Page 10

    10 how to assemble the light kit and blade switch housing assembly figure 1 1. Securely attach the 6-pin switch housing connector to the wiring harness socket within the adapter assembly. (figure 1) switch housing assembly socket plate assembly socket plate assembly figure 3 3. Connect the 2 single ...

  • Page 11

    11 how to assemble the light kit and blade (continued) glass blade #8-32 x 6 mm washer head screw and fiber washer (3 each per blade) figure 6 6. Securely attach glass by twisting clockwise onto the socket plate assembly. Don’t overtighten or force it. (figure 6) 7. Position the blade over the blade...

  • Page 12

    12 how to operate your ceiling fan 1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box. (figure 1) 3. The hand-held remote transmitter includes buttons for high, medium and low fan speeds as well as fan off, light on/off and reverse. Infinite light levels...

  • Page 13

    How to install your remote control (option #1) how to install your remote control (option #2) how to install your remote control (option #3) 1. Drill the two 1/4” holes in wall and use the m6 plastic anchor pushed into the holes. Install the control bracket with two #3- 1” self tap screws. Push the ...

  • Page 14

    14 how to replace receiver figure 3 housing housing ceiling bracket assembly motor assembly motor assembly hook 1. Remove the four screws in the housing. Retain the four screws for installation step 7. (figure 1) 2. Carefully pull down the housing. Remove the four screws in the motor assembly from t...

  • Page 15

    15 how to replace receiver (continued) 5. Carefully secure the motor assembly onto the mounting slots on ceiling bracket assembly with the upward-clockwise, quarter-turn twist. (figure 5) 6. Secure the motor assembly onto the ceiling bracket assembly using the four screws that was previously removed...

  • Page 16

    16 trouble shooting ʆwarning for your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan. Trouble probable cause suggested remedy 1. Fan will not start 1. Fuse or circuit breaker blown. 2. Loose power line connections to the fan, or loose switch wire connection...

  • Page 17

    17 before discarding packaging materials, be certain all parts have been removed parts list model #fp6225bl ref. # description part # ¾¾ insert finish codes (refer to fan model number located on downrod support) how to order parts contact your retail store for repair parts. When ordering repair part...

  • Page 18

    18 note: fp6225bl exploded-view 1 figure 1 2 14 3 5 14 14 14 4 6 7 8 9 10 12 13 11.

  • Page 19

    10983 bennett parkway zionsville, in 46077 toll free (888) 567-2055 fax (866) 482-5215 outside u.S. Call (317) 733-4113 visit our website www.Fanimation.Com copyright 2012 fanimation 2012/08 v.01.