Owner’s manual read and save these instructions model no. Fp8014**-220 the arden ™ oscillating floor fan net weight 6kg. (13.10lbs).
Table of contents unpacking instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 electrical and structural requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 how to assemble your floor fan. . . ....
3 this manual is designed to make it as easy as possible for you to install, operate, and maintain your fan check to see that you have received the following parts: motor assembly • motor assembly • timber tripod legs timber tripod legs • hardware bag ▲ warning do not install or use fan if any part ...
4 how to assemble your floor fan x 12 3/16-24 x 22 mm cap head with spring washer hardware used: motor assembly leg t-wrench 1. Attach the timber tripod legs to the motor assembly using 3/16-24 x 22 mm screws. Use the supplied t-wrench to tighten the screws to ensure the legs are securely attached t...
5 maintenance periodic cleaning of your fan is the only maintenance that is needed. When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. Abrasive and/or non-abrasive cleaning agents are not required and should be avoided to prevent damage to finish. Caution do not ...
Copyright 2012 fanimation 2012/03 v.01 distributed in australia by myfan pty ltd www.Myfan.Com.Au.
