- DL manuals
- Fanstel
- Telephone
- ST45
- Installation Manual & User Manual
Fanstel ST45 Installation Manual & User Manual
Summary of ST45
Page 1
Call waiting id speakerphone featuring digital sound enhancement model st45, st50 installation guide & user manual.
Page 2
Table of contents setting up and installing your phone ................................................. 1 introduction ......................................................................................................... 1 important safety instructions .............................................
Page 3
Unavailable, private call and error messages ............................... 15 in case of difficulty ................................................................................... 16 resetting your telephone's programming ...................................................... 16 maintenance in...
Page 4
Page 1 setting up and installing your phone introduction congratulations on the purchase of your new telephone. It has been manufactured to very high quality standards for convenient and reliable service. This telephone can be used with "call identification (caller id) service" and/or "call waiting ...
Page 5
Page 2 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: (a) when the power supply cord or plug is damaged or frayed. (b) if liquid has been spilled into the product. (c) if the product has been exposed to rain or water. (...
Page 6
Page 3 controls and functions 1. Lcd display 2. Message light - visual message waiting indicator. 3. ◑ button – to adjust lcd contrast. 4. Flash button – during a call, to access telco’s calling features. 5. Redial/pause button – to redial last number, or to insert 3 seconds delay during memory butt...
Page 7
Page 4 select language 1 2 3 >eng esp fra 14. Vol. Button – to adjust receiver volume for handset and audio output. 15. Hold button – to put a call on hold. 16. Speaker button – to activate or deactivate speakerphone. 17. Visual ringer and in-use indicators 18. Telephone keypad 19. - to review upwar...
Page 8
Page 5 _ _ _ enter area code 7 digits dial 3 0 3 enter area code 7 digits dial _ _ _ - _ _ _ - _ _ _ enter area code 10 digits dial 7 2 0 enter area code 10 digits dial then, press the dial button to confirm the selection. 5. Program your area code (a) after selecting the language, the display flash...
Page 9
Page 6 the phone should then have two round plastic holes that can be used to hang your phone on the wall. 4. Use the two round holes to hang the phone on the wall plate on your wall. Important note : if you do not wish to mount your phone on the wall, the wall mount bracket can be reversed to raise...
Page 10
Page 7 adjusting the ringer volume the "ringer" switch on the back of the phone controls the volume. You can set the "ringer" switch to "hi" for a high volume ring, "md" for a middle volume ring or "off" to turn the ringer off. The visual ringer flashes for all incoming calls regardless of the ringe...
Page 11
Page 8 6. This set of volume and frequency specific tone amplification settings are saved automatically when you replace the handset. Note: if you adjust volume and/or tone amplification settings during a phone call, the new settings are saved automatically. Adjusting audio output volume you can plu...
Page 12
Page 9 using the telephone making a call 1. Pick up the handset or press the speaker button, and listen for a dial tone. 2. Using the keypad , dial the desired telephone number. The number you are dialing will appear on the display as you dial. When making a call or talking on the phone, the "in use...
Page 13
Page 10 switching between the handset and the speakerphone to switch a call between the handset and the speakerphone during a conversation: 1. While talking on the handset, press the speaker button to activate the speakerphone. The call can now be heard from the speakerphone. 2. While talking on the...
Page 14
Page 11 #25 480-948-4928 fanstel corp save to? #00 enter number> #00 4809484928 use save to end save to? 2. To release the mute, press the mute button again and you will be able to continue the conversation. Do not hang up the phone while a call is muted or the call will be disconnected. Storing a n...
Page 15
Page 12 10:30am 8/11 #20 480-948-4928 10:30am 8/16 #60 480-948-4928 fanstel corp 10:30am 8/16 25 new callers caller id caller id service and call waiting caller id service the "caller identification" service (caller id) allows the caller’s phone number and/or name to be shown on the display as the c...
Page 16
Page 13 #80 end of record # 61 deleted viewing the caller id list this caller id telephone automatically stores in the call memory the caller id information of the last 99 calls received. It keeps track of all calls received, whether they were answered or not. The oldest call in the call memory is a...
Page 17
Page 14 10:30am 8/16 # 61waiting 480-948-4928 fanstel corp # 61 48 new callers messages #00 del all! Deleting all calls from the caller id list to delete all the calls stored in call memory at once, press and hold the delete button for 5 seconds. The entire list of calls will be completely cleared a...
Page 18
Page 15 2:00pm 8/15 #42 _ _ _ _ _ _ _ _ _ _ _ _ unavailable 2:05pm 8/15 #43 _ _ _ _ _ _ _ _ _ _ _ _ private call #44 _ _ _ _ _ _ _ _ _ _ _ _ error listen to your new message, the message waiting indicators will turn off automatically after a short delay. If these indicators remain on even after you ...
Page 19
Page 16 in case of difficulty resetting your telephone's programming electrostatic or power surge (e.G., from lightning) may cause the phone to lock up. There are two ways to reset this phone. 1. Basic reset • disconnect the telephone line cord from the phone. • disconnect the ac adapter from the ph...
Page 20
Page 17 troubleshooting if your product does not work properly, try the following suggestions before seeking repair assistance: • check all line cord connections at the wall jack and at the telephone. • "caller identification" is a subscription service. Non-subscribers of this service cannot receive...
Page 21
Page 18 scottsdale, az 85260 warranty limitation implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the product is fit for ordinary use), are limited to one year from date of purchase. We will not pay for loss of time, inconvenienc...
Page 22
Page 19 (that is, your phone number), and b) the telephone equipment’s fcc registration number and ringer equivalence number (ren). These numbers are on the back or bottom of your telephone equipment. The ren is used to determine how many devices you may connect to your telephone line and still have...