Fantasea EyeDaptor MPK-F67 Instruction Manual - page 2
EyeDaptor MPK-F67 Instruction Manual
b. To install the adaptor, push it against the lens port starting from the bottom
(image B) and proceeding towards the top (image C).
c. After adaptor installation, make sure it is properly attached by gently trying
to pull it out. If properly installed, the adaptor should not easily come off the
lens port.
3. Attach the secure line to the adaptor and the housing, in order to secure the lens
and adaptor to the housing.
4. During the dive, install the 67mm threaded accessory lens on the thread of the
EyeDaptor MPK-F67 by gently screwing it in. The accessory lens can be installed and
removed during the course of the dive.
5. After the dive, detach the accessory lens and adaptor from the housing lens port and
rinse all lens components in fresh water. In order to remove the adaptor from the
housing lens port, first detach the secure line and then gently push the adaptor off,
starting from the top and proceeding with the bottom.
6. Dry and store in a safe protected place.
For further information please contact us at
http://www.fantasea.com/contact
or visit our
website at
www.fantasea.com
.
Image B
Image C