Fantasea FL-19 Instruction Manual - Note!
9
A huge bright 3.0 Inch high resolution LCD screen on the L20 camera (and a 2.7 inch screen on the L19
camera) makes it easy to compose and share your images. In addition, the high contrast and anti-
reflection on the screen assists in clear viewing, even in direct sunlight. Motion detection automatically
controls the ISO settings to compensate for camera shake and subject movement, reducing the chances
of getting blurred images.
The L19 and L20 cameras adjust up to ISO 1600 to keep shooting even in lower light, creating new
opportunities to take sharper, more natural-looking photos.
The Easy Auto Mode with an automatic scene selector simplifies your picture-taking experience by
letting the camera automatically select the best setting to get great pictures.
USING THE FANTASEA FL-19/20 HOUSING
OPENING THE HOUSING
1. Release all four latches at the same time, and lift off the back half to open the housing.
INSERTING CAMERA
Since the Fantasea FL-19/20 is specifically designed for the Coolpix L19 and L20 digital cameras, inserting
the camera into the housing is quite simple.
1. Mount the camera on the removable tray, using the tripod screw.
2. Slide the tray and camera into the housing tray slot. Make sure it is completely inserted.
3. Make sure the camera lens is more or less centered in the rounded port area and that the lens does not
distort the round black rubber seat. The housing is designed to have the camera fit in place perfectly,
but if you are not careful, it is possible to put it in at an improper angle and it will then be impossible
to get a good seal or easy closure of the housing.
Note!
It is strongly recommended to take the first dive without the camera
inside the housing. You should check that the water tight seal has
not been affected during transport and long periods of storage.