Fantasea FP7100 Faq
Fantasea Line FP7100 Housing FAQ’s
1.
What was the FP7100 Housing designed for?
The FP7100 Housing is ideal for outdoor and underwater photography. Underwater
photographers can dive or snorkel and capture all the excitement of this fascinating world,
while outdoor photographers also have the option of capturing the action of outdoor and
water sports activities, such as paddle sports, sailing, boating, surfing, fishing, hunting,
backpacking and camping. The FP7100 Housing is shock resistant and protects the camera
from water, sand, dust, frost, impact, as well as other damaging elements and harmful
occurrences.
2.
What kind of warranty is provided with the FP7100 Housing?
The housing is covered under Fantasea Line’s one-year limited warranty. Please
click here
for
further information regarding the warranty program.
3.
Where can I see videos and images captured by the FP7100 Housing?
A variety of videos, images and reviews can be found on the official FP7100 Housing website
–
www.nikondive.com
4.
How do I operate shutter speed and aperture through the housing in the Manual
shooting mode?
In the Aperture and Shutter Speed shooting modes, altering aperture or shutter speed is
carried out by simply rotating the command dial on the top right of the housing. In the
Manual mode, you can alter both aperture and shutter speed by using the command dial on
the top right of the housing and the sub-command dial on the front of the housing. In order
to switch between the function each of these dials control (aperture or shutter speed),
reassign them through the camera menus.
5.
How do I deactivate the camera’s built-in flash through the housing after it has
popped up?
Once the built-in camera flash has been popped up, it cannot be pushed back down
physically through the housing. Therefore, in case you need to eliminate the flash during
the dive after it has been popped up, follow the steps below:
a. Enter any of the manual shooting modes (M, A, S, P, U1, U2 or U3).
b. Push the menu control.
c. Using multi-selector controls, enter the Shooting Menu.
d. Using the “down” multi-selector control, scroll down till you have reached the
Flash Control item. Push the OK control.