Fantasea Line FG9X Instruction Manual - page 7
FG9X Housing Instruction Manual 20160409
7
www.fantasea.com | www.canondive.com
Numbered descriptions below refer to corresponding numbers on the two housing graphics above.
1. Shutter Release – Activates the camera shutter release button and auto focus prior to capturing an
image.
2. Mode Dial – Turn this dial to change shooting modes. Note that when using this control on land,
slight pressure should be exerted on the mode dial in order to increase friction with camera dial,
resulting with effective manipulation of the dial. Underwater, no such pressure shall be required.
Important Notice! It is recommended to align housing and camera mode dials prior to installing
the camera inside the housing. Please refer to the section “Installing the Camera” for more
information. Note that even when housing and camera mode dials are aligned prior to the dive, they
might come out of alignment while diving. Always confirm proper shooting mode by referring to the
LCD screen (top left corner).
3. Zoom Lever – Turning this control activates the camera zoom button.
Flash Pop-Up
Movie (Video Control)
Menu
Latch
Latch Lock
19
Flash Push-Down Lever
5
Zoom Lever
Cold Shoe Mount
3
4
Mode Dial
2
Shutter Release
1
Playback
20
Power On/Off
21
Anti-Glare
Hood for LCD
12
13
14
Quick Set Menu
15
11
Info
16
Touch Screen Controls
17
18