Fantasea Nano LED Pro Set Operator's Manual

Summary of Nano LED Pro Set

  • Page 1

    1.

  • Page 2

    2 table of contents 1. Introduction ........................................................................................................ 3 2. Installing and removing batteries............................................................. 4 3. Turning the nano led pro on/off .........................

  • Page 3

    3 1. Introduction the nano led pro is a compact and powerful multi-purpose led light system. The nano led pro set was uniquely designed to be used as a: • powerful diving torch • focus light for underwater photography • signaling light for above and below water, perfect for diver or vessel identific...

  • Page 4

    4 2. Installing and removing batteries a. Prior to installing batteries, the white cone should be removed. Simply detach the cone from the flashlight’s head by gently pulling them away from each other. Make sure that when separating the cone from the flashlight, there is no tension exerted on the co...

  • Page 5

    5 g. It is recommended to occasionally apply a slight amount of silicone grease to the black o-ring seal found on the flashlight after unscrewing the flashlight head counterclockwise. H. In order to attach the cone to the flashlight again, simply cover the flashlight’s head with the open side of the...

  • Page 6

    6 4. Assembling the cone and multi-colored plastic disks a. Detach the cone from the flashlight’s head by gently pulling them away from each other. Make sure that when separating the cone from the flashlight, there is no tension exerted on the cone’s lanyard, which is wrapped around the flashlight. ...

  • Page 7

    7 c. Leave as little slack as possible to the hand lanyard, so the light is tied to the tank valve as closely as possible. D. Since the cone consists of positive buoyancy, the nano led pro will be pointing up during the dive. E. After the dive, detach the nano led pro from the tank valve and soak an...

  • Page 8

    8 7. Specifications • batteries: 4 x aaa batteries • burn time: up to 2 hours per set of batteries • led life time: over 10,000 hours • luminous intensity: over 50 lumen • led type: 3w high-power led • color temperature: 5,000-10,000k • color of torch: metallic coated finish • color of light: clear,...