Fantec HDC portable User Manual - page 11
of
13
(6) RAID1 HDD Rebuild.
When the system in RAID1 mode, if one HDD has broken, the system will rebuild
automatically as following,
1. If the Raid1 system is broken, the “F” will be show as following, and the buzzer
will alarm once per second.
2. Press the
▲ and ▼ button to select the “Information ”
“Drive1 ” or
“Drive2 ”.
NOTE: The Drive1 one is the “source HDD”, the Drive2 is the “Object HDD”
3. If the HDD is broken, the display will show as following, then you can change
the bad one.