Fantec LD-H35U3 Manual - 3. Using
FANTEC LD-H35U3Manual
EN - 13 -
3. Using
3.1. Connection and usage of the product
This product owns a USB 3.0 interface, so it can support hot plug &
play. You can connect and use it under the follow system.
In Microsoft operating system:
A.Startup the PC
• Make sure the PC works normally.
• Connect the USB cable.
• Indicator of the product turns on.
B.The green iconc appears and the hardware is found by the system
y The green arrowhead icon appears right down the corner of the
screen, and the product is recognized by the operating system.
C. Open” my computer” and the new disk appears.
y If there were partitions C and D, the system will assign drive
letter E for the disk.
y The speed of disk symbol appearing may vary, because of the
difference between hardware and software. This is a normal
behavoir.
D.Common usage.
y The operation is similar to a common hard disk.
y The LED flickers during the reading and writing process.
y The product indicator stops flickering or slow down flickering if