Fantec QB-X8US3 Quick Installation Manual

Summary of QB-X8US3

  • Page 1

    Note operation environment temperature 0 ~ 50 °c humidity 90 % rh esata transfer data up to 3.0gbps usb 3.0 transfer data up to 5.0gbps usb 1.1 / 2.0 / 3.0 compatible 2. Interface of usb / esata can not be used at the same time. 3. References smart fan controlled by the built-in thermal sensor and i...

  • Page 2

    Quick installation guide 1. Please use screws to secure the handles to the hdds. 2. Unlock the cover with the key supplied and press onto the lock to open the cover. 3. Open the inner covers. 1 1 4 3 2 descriptions fan esata port usb 3.0 / usb 2.0 port ac input port 1. 2. 1. 3. 4. Rear panel overvie...

  • Page 3

    Initialization 1. Start disk initialization. 3. Hdd format completed. 2. Create new partition and format disk. If the hdd is uninitialized, you may have to initialize it by doing steps as followed: at first click “start” at your pc and key in “diskmgmt.Msc”. After that please press “ok” key. Ms wind...

  • Page 4

    Trouble shooting step 7 1. If the device (8 hdds installed) is connected to the pc with esata cable and the sata hdd icon does not come out in 8, please check if the esata interface card supports port multiplier or update the esata driver version. 2. If the transfer rate is not normal, please check ...