Fantech FTC-P-18-5 Technical Manual

Manual is about: FTC-P-18-5

Summary of FTC-P-18-5

  • Page 1

    High‐pressure misting system technical manual fan technologies inc. 1 fan tech ftc‐p‐18‐5 technical manual  carefully read and understand the entire technical manual before attempting to install, operate, or perform maintenance on this equipment.  contact your supplier if you do not understand the...

  • Page 2

    High‐pressure misting system technical manual fan technologies inc. 3 tableofcontents overview of fan tech high‐pressure misting system .............................................................................. 5 start‐up and operation procedures ....................................................

  • Page 3: Warning

    High‐pressure misting system technical manual fan technologies inc. 5 overviewoffantechhigh‐pressuremistingsystem thank you for choosing fan tech as your provider for high‐pressure misting systems. Fan tech is devoted to providing its customers with reliable high‐pressure cooling systems engineered ...

  • Page 4: Caution

    High‐pressure misting system technical manual fan technologies inc. 6 3. Initial operation and start up of the system. Turn on the water supply and allow the tank to begin to fill up. The unit may be operated with the water supply connected or disconnected. If operating with the water supply disconn...

  • Page 5

    High‐pressure misting system technical manual fan technologies inc. 7 maintenance 1. Nozzles. Nozzles should be checked regularly to ensure the best misting performance. The mist or fog should emit from the nozzle in an even cone shape. If the mist is not an even cone shape the nozzle needs to be cl...

  • Page 6

    High‐pressure misting system technical manual fan technologies inc. 8 troubleshooting problem potential cause corrective action fan will not run. Power supply connections confirm the control knobs are in the on position. Confirm the power cords are connected. Confirm that the power supply is on. Mis...

  • Page 7

    High‐pressure misting system technical manual fan technologies inc. 9 circuit breaker switched off. Confirm breaker is no being overloaded or is not worn. Re‐size or replace if faulty. Drought switch activated. Confirm the supply water has a pressure between 15‐70 psi. A shared water supply may decr...

  • Page 8

    High‐pressure misting system technical manual fan technologies inc. 10 water sprays from nozzles after system is shut down. Anti‐drip not functioning. Check integrity of anti‐drip ball and spring. Filter housing leaks. O‐ring failure. Inspect placement and integrity of o‐ring. Replace if necessary. ...

  • Page 9

    Fan tech one (1) year limited warranty all fan tech products are warranted for a period of one (1) year for defects in workmanship and materials under normal use and service. This warranty is extended solely to the original purchaser. In order to initiate this warranty, the product registration form...

  • Page 10

    High‐pressure misting system technical manual fan technologies inc. 12 appendix partsdiagram.

  • Page 11

    High‐pressure misting system technical manual fan technologies inc. 13 controlpanel fancontrols.

  • Page 12

    High‐pressure misting system technical manual fan technologies inc. 14 nozzlecomponents fan technologies inc. Po box 1776 cedar park, tx 76813 by: d. Kowal date: xx/xx/xxxx.