1. DL manuals
  2. Fantech
  3. Air Cleaner
  4. HEPA DM 3000P
  5. Installation & Operation Manual

Fantech HEPA DM 3000P Installation & Operation Manual

Other manuals for HEPA DM 3000P: Installation, Operation And Maintenance Manual
Manual is about: Air Filtration System

Summary of HEPA DM 3000P

  • Page 1

    Hepa dm 3000p air filtration system important - please read this manual before installing unit caution - before installation, careful consideration must be given to how this system will operate if connected to any other piece of mechanical equipment, i.E. A forced air furnace or air handler, operati...

  • Page 2

    Table of contents warranty specification.......................................................................................................................... .............................................................2 installation ................................................................

  • Page 3

    Cut around dotted line couper autour ligne pointillÉe airflow airflow 1. Using enclosed template, draw holes on duct. 1. Utiliser le gabarit pour localiser les trous à percer dans le conduit. 3. Screw mounting plate to duct. 3. Visser la plaque de distribu- tion au conduit en repliant les bords affa...

  • Page 4

    Airflow airflow 2. Cut holes in duct. 2. Découper les trous. 4. Attach unit to mounting plate with screws. 4. Attacher l’unité à la plaque en prenant soin de la glisser dans les fentes conçues à cet effet. Cut around dotted line couper autour ligne pointillÉe direction de l’air direction de l’air.

  • Page 5

    1. Using mounting plate, mark holes on furnace return duct to be cut. 2. Cut holes in desired location and attach mounting plate to duct with screws. 3. Make sure the negative static pres- sure tube from the pressure switch is inserted into the return air duct properly. The end of the tube should be...

  • Page 6

    A) problem: when the dm3000p is on "standby" it does not come on. 1) the pressure switch's positive pressure port is not connected. Solution: use the supplied tube and grommet and install one end of the tube to the supply (positive pressure) air duct and the other end of the tube to the pressure swi...