Fantech SHR series Installation, Operation And Maintenance Manual

1

SHR & VHR Models

INSTALLATION, OPERATION AND MAINTENANCE MANUAL

SHR 1504 • SHR 1505 R(D) • SHR 2004 • SHR 2005 R(D) • SHR 3005 R • SHR 3205RD

VHR 1404 • VHR 1405 R • VHR 2004 • VHR 2005 R

Your ventilation system should be installed in conformance with the appropriate provincial or state requirements

or in the absence of such requirements with the current edition of the National Building Code, and / or

ASHRAE’s “ Good Engineering Practices”.

IMPORTANT - PLEASE READ THIS MANUAL

BEFORE INSTALLING UNIT

CAUTION - 

Before installation, careful consideration must be given to how this system

will operate if connected to any other piece of mechanical equipment, i.e. a forced air furnace

or air handler, operating at a higher static. After installation, the compatibility of the two

pieces of equipment must be confirmed by measuring the airflow’s of the Heat Recovery or

Energy Recovery Ventilators by using the balancing procedure found in this manual.

It is always important to assess how the operation of any HRV/ERV may interact with vented

combustion equipment (i.e. Gas Furnaces, Oil Furnaces, Wood Stoves, etc.).

NEVER - 

install a ventilator in a situation where its normal operation, lack of operation or

partial failure may result in the backdrafting or improper functioning of vented combustion

equipment!!!

SHR & VHR Series

Heat Recovery Ventilator