Cyclonic bagless upright owner’s manual model fm718 120v., 60hz., 12 amps fantom 94 main mill street, door 16 plattsburgh, ny 12901 tel.: 1 (800) 275-9251 www.Fantom.Com.
Model fm718 one (1) year limited warranty fantom warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase. This warranty applies only to normal domestic household use. Should your appliance fail to operate properly ...
Important safety instructions when using your bagless upright vacuum, basic safety precautions should always be observed, including the following: warning: to reduce the risk of fire, electrical shock, or injury: 1. Do not leave vacuum cleaner unattended when it is plugged in. Unplug from outlet whe...
Cyclonic bagless upright precautionary measures important: if the suction opening in the unit, the hose or the extension tube become blocked, switch off the vacuum cleaner and remove the blocking substance before you start the unit again. 5. When pulling out the power plug from the wall outlet, pull...
Problem solving getting to know your cyclonic bagless upright this appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor problem occurs, it usually can be solved quite easily when the cause is found. Therefore, this checklist is provi...
Handle assembly 1. Carefully unpack all components, set aside packaging. 2. Lift vacuum body to upright position. 3. Remove the screw (1) that comes attached to the body. 4. From the rear of the vacuum, align the handle with groove and slide onto vacuum. If necessary, use thumb and finger pressure t...
Operating instructions operating instructions cleaning the dust cup cleaning & changing the belt carpet height selector this upright vacuum can be used on multiple types of carpeting, bare floors or upholstery with attachments. To select a pile height setting: 1. Turn vacuum cleaner "off". 2. Select...
Operating instructions operating instructions pre-motor filter cover pre-motor filter lug holes fig. 16 1. To remove the hepa filter, remove the dust cup from the unit. 2. To remove the dust cup cover, hold the cover by the handle, turn counter clockwise and lift the cover off. (fig. 9) 3. Remove th...
