Fantom FM740 Instruction Manual - Using The Attachments

Install the wand to the hose.

To achieve maximum reach with the attachments,attach the crevice tool to the end of the wand.

Securely and firmly connect the wand to the hose while twisting the wand, as shown in the

illustration below.

The upholstery tool & dusting brush can be attached directly to the wand, hose or the end of the

crevice tool.  Refer to the illustration for the correct way to position the upholstery tool  & 

dusting brush.

The end of the wand which has the marking of              should be connected to the hose.

USING THE ATTACHMENTS

Caution:  When using the attachments during cleaning, set the vacuum

                  cleaner to the upright position.

Disconnect the hose from the vacuum

cleaner.

Pull the hose gently in the direction of 

the arrow to disconnect it.

Upholstery tool & Dusting brush

To detach the dusting brush from the upholstery tool: Press the 

tabs on the brush downward to remove it.

To reattach the dusting brush to the upholstery tool: Insert 

the front of the upholstery tool under the hook on the front of the 

dusting brush. Press down on the back of the upholstery tool to

snap it into place under the dusting brush tabs. 

1

4

Tabs

7

Hose 

2

Hook the hose holder onto the 

holder mount.

Caution:

Before using the attachments, 

please make sure the hose is 

hooked on the holder mount.

Remove the wands from the

vacuum cleaner.

Two wands are contained together.

Pull out the second wand as shown.

Caution:

3

When removing the attachments,pull

them in the directions shown in the

illustration.Pulling them in the wrong

direction or pulling them forcefully may

cause damage to the attachment ribs.

Holder 

Mount

Hose

Holder

Crevice  

Tool

Wands

1

2

Second

Wand

Hose

Wands

Upholstery 

Tool

Crevice Tool

Crevice Tool

Dusting Brush

Crevice Tool

Wand

Hose