Fanvil product user manual ip phone model: c56/c56p version: v.2.2.0.0 © 2005 fanvil technology co., ltd all rights reserved. This document is supplied by fanvil technology co., ltd, no part of this document may be reproduced, republished or retransmitted in any form or by any means whatsoever, whet...
2 table of content 1.Introducing c56/c56p voip phone.............................................................................................................4 1.1. Thank you for your purchasing c56/c56p .....................................................................................4 1.2. D...
3 safety notices please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operation of the device. please use the external power supply that is included in the package. Other power supplies may cause damage to the phone, affect the ...
4 1. Introducing c56/c56pvoip phone 1.1. Thank you for your purchasingc56/c56p thank you for your purchasing c56/c56p, c56/c56p is a full-feature telephone that provides voice communication over the same data network that your computer uses. This phone functions not only much like a traditional phon...
5 hold temporarily hold the active call during the talking; press the key again to unhold the call. You also can press this key then input the third party’s phone number and end with the # key during calling; you can make a call with the third party and hold the previous calling. (3.1.5-calling hold...
6 step 2: connect the handset to the handset port by the handset cable in the package. Step 3: connect the power supply plug to the dc port on the back of the phone. Use the power cable to connect the power supply to a standard power outlet in your workspace. Step 4: push the on/off switch on the ba...
2.2. Initial setting this voip phone provides you with rich function and parameters setting. If you have enough knowledge about network and sip protocol, it is better for you to understand many parameters. But if you know little about network and sip protocol, you can also easily make initial settin...
8 10. Press the key twice, then press numeric key “3”and hold until the screen display “are you sure”. Press the key, the screen will display “changing”, which means that the phone is trying to switch to pppoe mode. If the icon “pppoe” on the top of the screen keeps blink, it shows that the phone is...
9 display “dns”. Press the key then the key, input your dns address and confirm it by pressing the key, and then the lcd will display the inputted dns address. 8. Press the key to return to the previous menu, and then press the key, the lcd screen will display “gateway”. Press the key and the key, i...
10 server, and the ip is 0.0.0.0 if you press key to display the current ip; if the icon “dhcp” is showed without blink, it means that the phone has already gotten ip from dhcp server. 3. Basic functions 3.1. Basic operation 3.1.1. Accepting a call there are four methods to accept an incoming call: ...
11 3.1.3. Ending a call hangs up by handset on hook hangs up by press when in hands-free hangs up a call in call waiting state. If you are in call waiting state, you could press # key to hang up the current call, and switch to the other call to keep talking. Note: pressing # key will not hang ...
12 missed calls press the key, and then the / key, till the lcd screen display “missed”. Press the key, the lcd screen will display the missed call number and sequence numbers of the missed call. You can press the key to dial this phone number, you also press up/down key to browse the other missed...
13 3.2.2. Redial/unredial if b is in busy line when a calls b, a will get notice: busy, please hang up. If a want to connect bas soon as b is in idle, he can use redial function at the moment and he can dial an appointed prefix number plus b’s number to realize redial function. What is redial functi...
14 4. Setting 4.1. Setting methods voip phone is different from the traditional phone; it need be set to make it active. If your voip service provider asks you to set this phone, you can do it easily according to the following methods. This voip phone can be set via three different setting methods: ...
15 4.3. Configuration via web 4.3.1. Basic 4.3.1.1. Status status field name explanation network shows the configuration information on wan and lan port, including the connect mode of wan port (static, dhcp, pppoe), mac address, the ip address of wan port and lan port, on or off of dhcp mode of lan ...
16 wizard field name explanation please select the proper network mode according to the network condition. Fv6030 provide three different network settings: static ip: if your isp server provides you the static ip address, please select this mode, and then finish static mode setting. If you don’t k...
17 display detailed information that you manual config. Choose dhcp mode，click【next】to config simple sip(default sip1). You can browse it too. Click【back】to return to the last page. Like static ip mode。 choose pppoe mode，click【next】to config the pppoe account/password and sip(default sip1). You can ...
18 field name explanation start time display the start time of the outgoing call duration display the conversation time of the outgoing call. Dialed calls display the account/protocol/line of the outgoing call. 4.3.2. Network 4.3.2.1. Wan config wan config field name explanation active ip address th...
19 pppoe: in this mode, your must input your adsl account and password. You can also refer to 3.2.1 network setting to speed setting your network. If you use static mode, you need set it. Ip address input the ip address distributed to you. Subnet mask input the subnet mask distributed to you. Ip g...
20 in chart 1, there is a layer 2 switches without setting vlan. Any broadcast frame will be transmitted to the other ports except the send port. For example, a broadcast information is sent out from port 1 then transmitted to port 2,3and 4. In chart 2, red and blue indicate two different vlans in t...
21 audio dscp specify the value of the audio dscp enable wan port vlan enable wan port vlan by selecting it wan port vlan id specify the value of the wan port vlan id, the range of the value is 0-4095 sip 802.1p priority specify the value of the voice 8021.P priority, the range of the value is 0-7 a...
22 notice: 1）you need save the configuration and reboot the phone after set this page. 2）if you modify the port of telnet and http, you would better set the value more than 1024 because the port value less than 1024 is system port reserved. 3）if you set 0 for the http port, it will disable http serv...
23 minute setup start and end minutes notice: you need specify the above all items. 4.3.3. Voip 4.3.3.1. Sip config set your sip server in the following interface..
24 sip config field name explanation choose the sip line to set info about sip;there are 2 lines to choose. You can switch by 【load】 button. Status shows if the phone has been registered the sip server or not; or so, show unapplied. Server name set the server name. Server address input your sip serv...
25 proxy server address set proxy server ip address（usually, register sip server configuration is the same as proxy sip server. But if your voip service provider give different configurations between register sip server and proxy sip server, you need make different settings.） proxy server port set y...
26 administrator for the connecting code. Different systems have different codes. Subscribe period overtime of resending subscribe packet. Suggest using the default configuration. Conference type specify the conference type, if you select the local, you needn’t input the conference number conference...
27 anonymous off code set the anonymous off code, when you choose to disable the anonymous call function on your ip phone, it will send information to the server, and the server will disable the anonymous call function for your ip phone automatically. Keep alive type specify the keep alive type, if ...
28 click to talk set click to talk (need practical software support). Enable blf list enable blf list by selecting it, blf list is a function which can monitor the group status, it is not one to one monitoring, but the information feedback from the sever to decide which blf list will monitor blf lis...
29 stun field name explanation stun nat transversal shows stun nat transverse estimation, true means stun can penetrate nat, while false means not. Server address set your sip stun server ip address server port set your sip stun server port binding period set stun blinding period(s). If nat server f...
30 to save the memory and avoid abundant input of user, add the follow functions: 1、x match any single digit that is dialed. If user makes the above configuration, after user dials 11 digit numbers started with 13, the phone will send out 0 plus the dialed numbers automatically. 2、 [] specifies a ra...
31 1) add: xxx, it means that you need dial xxx in front of phone number, which will reduce dialing number length. 2) all: xxx, it means that xxx will replace some phone number. 3) del: it means that phone will delete the number with length appointed. 4) rep: it means that phone will replace the num...
32 if your dialed phone number starts with your set phone number. The phone will send out your dialed phone number adding suffix number. When you dial “147”, the sip1 server will receive “1470011” 4.3.4. Phone 4.3.4.1. Audio in this page, you can configure voice codec, input/output volume and so on....
33 4.3.4.2. Feature in this web page, you can configure hotline, call transfer, call waiting, 3 ways call, black list, white list limit list and so on..
34 call service field name explanation do not disturb select no disturb, the phone will reject any incoming call, the callers will be reminded by busy, but any outgoing call from the phone will work well. Ban outgoing if you select ban outgoing to enable it, and you cannot dial out any number. Enabl...
35 2). Fixed length: the phone will intersect the number according to your specified length. 3). Time out: after you stop dialing and waiting time out, system will send the number collected. 4). User defined: you can customize digital map rules to make dialing more flexible. It is realized by defini...
36 cause extensions 1000-8999 to be dialed immediately cause 8 digit numbers started with 9 to be dialed immediately cause 911 to be dialed immediately after it is entered. Cause 99 to be dialed after 4 seconds. Cause any number started with 9911 to be dialed 4 seconds after dialing ceases. Notice: ...
37 4.3.4.5. Webdial you can make a call through the web dial, enter the dial num then press dial, if you want to finish the talk, press hang-up. Added to the phone. Export contact file export xml click export xml button to export phonebook file of xml model export csv click export xml button to expo...
38 4.3.5. Function key the phone has 4 programmable keys which are able to set up to many functions per key. The following list shows the functions you can set on the programmable keys and provides a description for each function. The default configuration for each key is none which means the key ha...
39 4.3.6. Maintenance 4.3.5.1. Auto provision fanvil endpoint supports pnp and dhcp and phone flash to obtain the parameters. The pnp and dhcp and phone flash are all deployed, endpoint will go by the following process to try to obtain the server address and other parameters, when it boots up: dhcp ...
40 provision would stop here. If the endpoints confirm the configuration by digest method, the endpoints wouldn’t upgrade configuration unless the configuration in the server is different with the running configuration. User set ftp/http/https server username. System will use anonymous if username k...
41 syslog configuration field name explanation syslog settings server ip set syslog server ip address. Server port set syslog server port. Mgr log level set the level of mgr log. Sip log level set the level of sip log. Iax2 log level set the level of iax2 log. Enable syslog select it or not to enabl...
42 config setting field name explanation save configuration you can save all changes of configurations. Click the save button, all changes of configuration will be saved, and be effective immediately. Backup configuration right clicks on “right click here…” and select “save target as config file(.Tx...
43 ftp/tftp server. The configuration will be effective after the phone is reset. 4. Phone book export (.Vcf, .Csv, .Xml): upload the phonebook file to ftp/tftp server, name and save it. 5. Phonebook import (.Vcf, .Csv, .Xml): download the phonebook file to phone from ftp/tftp server. Protocol selec...
4.3.5.5. Access you can add or delete user account, and change the authority of each user account in this web page access configuration field name explanation lcd menu password settings set the password for entering the setting menu of the phone by the phone’s key board. The password is digit. This ...
45 if you modified some configurations which need the phone’s reboot to be effective, you need click the reboot, then the phone will reboot immediately. Notice: before reboot, you need confirm that you have saved all configurations. 4.3.6. Security 4.3.6.1. Mmi filter mmi filter user could make some...
46 4.3.6.2. Firewall firewall configuration in this web interface, you can set up firewall to prevent unauthorized internet users from accessing private networks connected to the internet (input rule), or prevent unauthorized private network devices from accessing the internet (output rule). Firewal...
47 which network id is c type. Dest mask set the destination address’ mask. For example, 255.255.255.255 means just point to one host; 255.255.255.0 means point to a network which network id is c type. Click the add button if you want to add a new output rule. Then enable out access, and click the a...
48 4.4.2. Phone menu phone main menu: 5. Appendix 5.1. Specification 5.1.1. Device specification item this voip phone adapter(input/output) input：100-240vac 50～60hz output：5v/1a wan 10/100base- t rj-45 for lan, auto mdix port lan 10/100base- t rj-45 for pc, auto mdix power consumption idle：1.5w/acti...
49 support phonebook 500 records, incoming calls / outgoing calls / missing calls. Each supports 100 records support conference call in server could dial use private server automatically when public server unregistered while private server is registered successfully phonebook supports vcard ...
50 4 g h i g h i . 5 j k l j k l 0 6 m n o m n o #.
