1. DL manuals
  2. Fanvil
  3. Intercom System
  4. i31
  5. User Manual

Fanvil i31 User Manual

Manual is about: IP Video Door Phone

Summary of i31

  • Page 1

    [䬂ܹ᭛ᄫ] i31 ip video door phone user manual wall mounted in-wall.

  • Page 2: Safety Notices

    [䬂ܹ᭛ᄫ] safety notices 1. Please use the specified power adapter. If you need to use the power adapter provided by other manufacturers under special circumstances, please make sure that the voltage and current provided is in accordance with the requirements of this product, meanwhile, please use the ...

  • Page 3

    [䬂ܹ᭛ᄫ] directory a. Product introduction ............................................................................................................ 5 1. A ppearance of the product .............................................................................................................. 5 2. D ...

  • Page 4

    [䬂ܹ᭛ᄫ] a) function key ..................................................................................................................... 25 b) media .................................................................................................................................. 27 c) dnd .........

  • Page 5: A. Product Introduction

    [䬂ܹ᭛ᄫ] a. Product introduction i31 is a full digital network door phoneˈits core part adopt mature voip solution(broadcom chipset), stable and reliable performance, hands-free adopting digital full-duplex mode, voice loud and clear, video clear, generous appearance, solid durable, easy for installat...

  • Page 6: 2.  Description

    [䬂ܹ᭛ᄫ] 2. Description buttons and icons description function numeric keyboard input password to open the door or calls. Programmable keys can be set to a variety of functions, in order to meet the needs of different occasions induction zone rfid induction area lock status door unlocking: on door loc...

  • Page 7: B. Start Using

    [䬂ܹ᭛ᄫ] b. Start using before you start to use equipment, please make the following installation: 1. Confirm connected confirm whether the equipment of the power cord, network cable, electric lock control line connection, the startup is normal. (check the network state of light) 1) power port power s...

  • Page 8

    [䬂ܹ᭛ᄫ] 4) wiring instructions z no: normally open contact. Z com: common contact. Z nc: normally close contact. Driving mode driving mode jumper port connections active passive no nc √ √ √ √ √ √ √ √ √ √.

  • Page 9

    [䬂ܹ᭛ᄫ] 2. Quick setting the product provide a complete function and parameter setting, users may need to have the network and sip protocol knowledge for understanding the meaning represented by all parameters. In order to let equipment users can quickly enjoy the high quality speech brought by the i...

  • Page 10: C. Basic Operation

    [䬂ܹ᭛ᄫ] c. Basic operation 1. Answer a call when calling come, the device automatically answer, in cancel automatic answer and settings automatic answer time, will hear the bell in the set time, automatic answer after a timeout. 2. Call configuration shortcut (key1) as hot key and setup a number, the...

  • Page 11: D. Page Settings

    [䬂ܹ᭛ᄫ] access code input correct prompt sowing sirens prompt access control and the remote user, input error by short low frequency chirp. Password successfully by high-frequency sirens sound prompt, input error is short by high frequency chirp. When the door opened by playing sirens sound prompt. D...

  • Page 12: 3.  Configuration Via Web

    [䬂ܹ᭛ᄫ] 3. Configuration via web (1) basic a) status status field name field name network shows the configuration information for wan port, including connection mode of wan port (static, dhcp, pppoe),mac address, ip address of wan port accounts shows the phone numbers and registration status for the ...

  • Page 13

    [䬂ܹ᭛ᄫ] wizard field name explanation select the appropriate network mode. The equipment supports three network modes: static ip mode the parameters of a static ip connection must be provided by your isp. Dhcp mode in this mode, network parameter information will be obtained automatically from a dhcp...

  • Page 14

    [䬂ܹ᭛ᄫ] d) time&date set the time zone and sntp (simple network time protocol) server on this page to automatically obtain time and daylight saving time, manual time and date entry are also done on this page. Time&date field name explanation system current time display the current time simple network...

  • Page 15

    [䬂ܹ᭛ᄫ] (2) network a) wan field name explanation wan status active ip address the current ip address of the equipment current subnet mask the current subnet mask current ip gateway the current gateway ip address mac address the mac address of the equipment.

  • Page 16

    [䬂ܹ᭛ᄫ] field name explanation wan settings enable vendor identifier enable or disable vendor identifier vendor identifier configure display vendor identifier select the appropriate network mode. The equipment supports three network modes: static network parameters must be entered manually and will n...

  • Page 17

    [䬂ܹ᭛ᄫ] field name explanation service port settings web server type specify web server type – http or https http port port for web browser access. Default value is 80. To enhance security, change this from the default. Setting this port to 0 will disable http access. Example: the ip address is 192.1...

  • Page 18

    [䬂ܹ᭛ᄫ] ¾ chart 2 shows an example with two vlans indicated by red and blue. In this example, frames broadcast from port 1 will only go to port 2 since ports 3 and 4 are in a different vlan. Vlans can be used to divide a network by restricting the transmission of broadcast frames. Note: in practice, ...

  • Page 19

    [䬂ܹ᭛ᄫ] field name explanation quality of service (qos) settings enable dscp enable or disable differentiated services code point (dscp) audio rtp dscp specify the value of the audio dscp in decimal sip dscp specify the value of the sip dscp in decimal wan port vlan settings enable wan port vlan enab...

  • Page 20

    [䬂ܹ᭛ᄫ] d) security field name explanation update security file select the security file to be updated. Click the update button to update. Delete security file select the security file to be deleted. Click the delete button to delete. Sip tls files show sip tls authentication certificate. Https files...

  • Page 21

    [䬂ܹ᭛ᄫ] sip field name explanation basic settings (choose the sip line to configured) status shows registration status. If the registration is successful will display has been registered, not successful display not registered, the wrong password is displayed 403 errors, account number failure display...

  • Page 22

    [䬂ܹ᭛ᄫ] field name explanation advanced sip settings proxy server address sip proxy server ip address or uri, (this is normally the same as the sip registrar server) proxy server port sip proxy server port. Normally 5060. Proxy user sip proxy server account. Proxy password sip proxy server password. ...

  • Page 23

    [䬂ܹ᭛ᄫ] field name explanation transport protocol configuration using the transport protocol, tcp, tls or udp, the default is udp. Enable rport enable/disable support for nat traversal via rfc3581 (rport). Keep authentication enable /disable registration with authentication. It will use the last auth...

  • Page 24

    [䬂ܹ᭛ᄫ] stun field name explanation stun nat traversal shows whether or not stun nat transversal was successful. Server address stun server ip address server port stun server port – default is 3478. Binding period stun blinding period – stun packets are sent at this interval to keep the nat mapping a...

  • Page 25

    [䬂ܹ᭛ᄫ] (4) intercom a) function key 1-4 programmable key in phone software (depend on hardware), you can configurate different feature on each key. You can ref to below indications for each feature. Default is na, means without any feature settings. ¾ key event settings set the key type to the key e...

  • Page 26

    [䬂ܹ᭛ᄫ] dss key type number line subtype usage hot key fill the called party’s sip account or address the sip account corresponding lines speed dial in speed dial mode, with can define whether this call is allowed to be hang up by re-press the speed dial intercom in intercom mode, if the caller’s ip ...

  • Page 27

    [䬂ܹ᭛ᄫ] — operation mechanism device through the dss key configuration of multicast address and port and started coding; set by web to monitor the multicast address and port; device sends a multicast, listens to the address of the device can receive the multicast content. — calling configuration the ...

  • Page 28

    [䬂ܹ᭛ᄫ] field name explanation dtmf payload type the rtp payload type that indicates dtmf. Default is 101 amr payload type set the amr payload typeˈnumerical based on between 96-127. Ilbc payload type set the ilbc payload typeˈnumerical based on between 96-127. Ilbc payload length set the ilbc payloa...

  • Page 29

    [䬂ܹ᭛ᄫ] field name explanation rtp control protocol(rtcp) settings cname user set cname user cname host set cname host sound update choose the ring tone files and then click update to apply sound delete delete the ring tone file sound settings set the ring tong files format is .Mp3 and .Wav c) dnd fi...

  • Page 30

    [䬂ܹ᭛ᄫ] d) feature feature field name explanation feature settings ban outgoing if enabled, no outgoing calls can be made. Speed dial action default is speed dial hand-down function enable telnet enable or disable telnet select your tone standard configuration signal sound. Enable intercom mute if en...

  • Page 31

    [䬂ܹ᭛ᄫ] e) mcast using multicast functionality can be simple and convenient to send notice to each member of the multicast, through setting the multicast key on the device, sending multicast rtp stream to pre-configured multicast address. By on the device configuration monitoring multicast address, l...

  • Page 32

    [䬂ܹ᭛ᄫ] page determines the priority equipment current in multicast session, how to deal with the new receiving multicast rtp stream, enabling the page switch priority, the device will automatically ignore the low priority of multicast rtp stream, receive priority multicast rtp stream, and keep the c...

  • Page 33

    [䬂ܹ᭛ᄫ] — the purpose of setting monitoring multicast "group 1" or "2" or "3" launched a multicast call. — all equipment has one or more common non multicast communication. — when you set the priority for the disable, multicast any level will not answer, multicast call is rejected. — when you set the...

  • Page 34

    [䬂ܹ᭛ᄫ] f) action url action url settings url for various actions performed by the phone. These actions are recorded and sent as xml files to the server. Sample format is http://internalserver /filename.Xml (5) safeguarding (only fully functional version support this feature).

  • Page 35

    [䬂ܹ᭛ᄫ] security settings field name explanation input settings input 1 open / close input port1 trigger mode when choosing the low level trigger (closed trigger), detect the input port 1 (low level) closed trigger. When choosing the high level trigger (disconnected trigger), detect the input port 1 ...

  • Page 36

    [䬂ܹ᭛ᄫ] field name explanation remote dtmf trigger by duration received the terminal equipment to send the dtmf password, if correct, which triggers the corresponding output port (the port level time change, by control) by calling state during the call, receive the terminal equipment to send the dtmf...

  • Page 37

    [䬂ܹ᭛ᄫ] (6) door phone a) door phone field name explanation initial value egs settings switch mode monostable: there is only one fixed action status for door unlocking. Bistable: there are two actions and statuses, door unlocking and door locking. Each action might be triggered and changed to the oth...

  • Page 38

    [䬂ܹ᭛ᄫ] field name explanation initial value enable access table enable access table: enter for opening door during calls. Disable access table: enter for opening door during calls. Enable hot key dialed mode selection mode allow system to call primary extension first, if there were no answer, it wou...

  • Page 39

    [䬂ܹ᭛ᄫ] b) door card door card field name explanation door card table index the serial number of has been issuer cards. Name the name of has been issuer cards. Id the card number of has been issuer cards. (note: the card is not registered in the remote access list is unable to open the door.) issuing...

  • Page 40

    [䬂ܹ᭛ᄫ] administrator table the show admin card the id, date and type. Add administrator id: admin card the card number. Type: issuer and revoking. Entrance guard in normal state, brush card(issuing card) entrance guard into the issuing state, and then brush to add a card, the card is added to the da...

  • Page 41

    [䬂ܹ᭛ᄫ] field name explanation access table according to entrance guard access rules have been added, can choose single or multiple rules on this list to delete operation. Add access rule you can add new access rules, or select an existing project within the list to modify name(necessary) user name d...

  • Page 42

    [䬂ܹ᭛ᄫ] d) door log according to open event log, can record up to two hundred thousand open event, after more than cover the old records. Right click on the links to select save target as the door log can export csv format. Field name explanation door opening log result show the results of door openi...

  • Page 43

    [䬂ܹ᭛ᄫ] (7) maintenance a) auto provision the equipment supports pnp, dhcp, and phone flash to obtain configuration parameters. They will be queried in the following order when the equipment boots. Dhcp option → pnp server →phone flash field name explanation auto provision settings current config ve...

  • Page 44

    [䬂ܹ᭛ᄫ] field name explanation common config encryption key encryption key for common configuration file download fail check times download failed and check times save auto provision information save the auto provision username and password in the phone until the server url changes download commoncon...

  • Page 45

    [䬂ܹ᭛ᄫ] field name explanation update mode 1. Disable – no update 2. Update after reboot – update only after reboot. 3. Update at time interval – update at periodic update interval tr069 settings enable tr069 enable/disable tr069 configuration enable tr069 warning tone enable or disable tr069 warning...

  • Page 46

    [䬂ܹ᭛ᄫ] level 5: notice; it is the normal but significant condition. Level 6: informational; it is the normal daily messages. Level 7: debug; debug messages normally used by system designer. This level can only be displayed via telnet. Field name explanation system log settings server address system ...

  • Page 47

    [䬂ܹ᭛ᄫ] field name explanation save configuration save the current equipment configuration. Clicking this saves all configuration changes and makes them effective immediately. Backup configuration save the equipment configuration to a txt or xml file. Please note to right click on the choice and then...

  • Page 48

    [䬂ܹ᭛ᄫ] e) access through this page, the user can accord need to add and remove users, can modify existing user permissions. Field name explanation user settings user shows the current user name user level show the user level; admin user can modify the configuration. General user can only read the co...

  • Page 49

    [䬂ܹ᭛ᄫ] (8) logout click from the web, visit next time when need to enter your user name and password..

  • Page 50: E.  Appendix

    [䬂ܹ᭛ᄫ] e. Appendix 1. Technical parameters communication protocol sip 2.0(rfc-3261) main chipset freescale i.Mx 6quad key dss key materials stainless steel dss key 1 or 2 numeric keyboard support audio audio amplifier 3w volume control adjustable full duplex speakerphone support (aec) dtmf type in-b...

  • Page 51: 2.  Basic Functions

    [䬂ܹ᭛ᄫ] 2. Basic functions z 2 sip lines z poe enabled z full-duplex speakerphone (hf) z numeric keypad (dial pad or password input) z intelligent dss keys (speed dial/intercom etc) z wall mounted / in-wall z special integrated noise reduction module z dual microphone omnidirectional voice pickup z i...

  • Page 52: F.  Other Instructions

    [䬂ܹ᭛ᄫ] f. Other instructions 1. Open door modes z local 1) local password — set (the default is "6789") via door phone\door phone as above. — use the device's keypad to input password and "#" key, then the door will be unlocked. 2) private access code — set and enable local authentication. — use the...

  • Page 53

    [䬂ܹ᭛ᄫ] 2. Management of card z add administrator there are 2 types of administrator cards: issuer used for adding cards, revocation used for deleting cards. 1) add input a card’s id, selected in the types and clicked , you can add issuer admin card. 2) add input a card’s id, selected in the types an...

  • Page 54

    [䬂ܹ᭛ᄫ] 3) use new card to touch card reader induction area, and then you might hear the confirmed indication tone from the device. Repeat step 3 to add more cards. 4) in web page option, select function. 5) click , card reader would be back to the normal status. 6) the issuing records can be found f...

  • Page 55

    [䬂ܹ᭛ᄫ] z delete user cards method 1: used to batch delete cards for starters. 1) in web page option, select . 2) click , card reader would be entered the revoking status. 3) use card to touch card reader induction area, and you might hear the card reader confirmed indication tone. Repeat step 3 to d...