[ 键入文字 ] pa2 sip video intercom & paging gateway user manual v2.0
[ 键入文字 ] document ver firmware ver explanation time v1.0 2.1.1.2924 initial issue 20170804 v.2.0 2.1.1.2924 increase the interface parameters, modify the company address, increase the qig ip scanning tool download address 20171027.
[ 键入文字 ] safety notices 1. Please use the specified power adapter. If you need to use the power adapter provided by other manufacturers under special circumstances, please make sure that the voltage and current provided is in accordance with the requirements of this product, meanwhile, please use th...
[ 键入文字 ] directory i. Product introduction ........................................................................................................................................ 1. Appearance of the product ..............................................................................................
[ 键入文字 ] c) video ...................................................................................................................................................... D) mcast .............................................................................................................................
[ 键入文字 ] 6 / 43 i. Product introduction pa2 is a sip video intercom & paging device for industry application. The media stream transmission adopts standard ip/rtp/rtsp protocol. It inherits the advantages of the stability and the sound quality of fanvil voip phone. It is perfectly compatible with al...
[ 键入文字 ] 7 / 43 label description label description label description 1 speaker interface 2 headset interface 3 led interface 4 function key interface 5 microphone interface 6 switch input interface 7 switch output interface 8 power input interface 9 camera interface 10 ethernet interface ⑪ registra...
[ 键入文字 ] 8 / 43 label explanation 1 speaker interface according to the device input voltage adaptive output maximum power; 4Ω speaker, poe / 10w, 12v / 10w, 18v / 20w, 24v / 30w. The greater the horn impedance, the smaller the output power. Suggested wire diameter: 18awg or larger diameter. 2 headse...
[ 键入文字 ] 9 / 43 ⑮grounding screw external parts metal housing needs to be connected to this interface to prevent static electricity and other interference caused the equipment to work abnormally. ( except microphone accessories ) 2. Quick setting the product provides a complete function and paramete...
[ 键入文字 ] 10 / 43 after configured timer. 2. Call configure function key as hot key and then set up a number; after that you might press the function key for making call to the configured extension(s). 3. End call enable release ( you can set function key to release ) key for hanging up feature to en...
[ 键入文字 ] 11 / 43 2. Password configuration there are two levels of access: root level and general level. A user with root level can browse and set all configuration parameters, while a user with general level can set all configuration parameters except server parameters for sip. General level: it is...
[ 键入文字 ] 12 / 43 information field name explanation system information display equipment model, hardware version, software version, uptime, last uptime meminfo and system time. Network shows the configuration information of wan port, including connection mode of wan port (static, dhcp, pppoe), mac a...
[ 键入文字 ] 13 / 43 c) configurations configurations field name explanation export configurations save the equipment configuration to a txt or xml file. Please right click on the choice and then choose “save link as.” import configurations find the config file, and press update to load it to the equipm...
[ 键入文字 ] 14 / 43 software upgrade find the firmware, and press update to load it to the equipment. E) auto provision auto provision field name explanation common settings current configuration version show the current config file’s version. If the config file to be downloaded is higher than current ...
[ 键入文字 ] 15 / 43 password configuration file encryption key encryption key for the configuration file general configuration file encryption key encryption key for common configuration file save auto provision information save the auto provision username and password in the phone until the server url...
[ 键入文字 ] 16 / 43 acs user user name of acs. Acs password acs password. Tr069 auto login enable/disable tr069 auto login. Inform sending period time between transmissions of “inform”; the unit is second. F) fdms fdms settings enable fdms enable/disable fdms configuration fdms interval the time to sen...
[ 键入文字 ] 17 / 43 syslog is a protocol used to record log messages using a client/server mechanism. The syslog server receives the messages from clients, and classifies them based on priority and type. Then these messages would be written into a log by rules which the administrator has configured. Th...
[ 键入文字 ] 18 / 43 some configuration modifications require a reboot to become effective. Clicking the reboot button would lead to reboot immediately. Note: be sure to save the configuration before rebooting. (2) network a) basic field name explanation network status ip the current ip address of the e...
[ 键入文字 ] 19 / 43 default gateway the current gateway ip address mac the mac address of the equipment mac timestamp get the mac address’s time. Settings select the appropriate network mode. The equipment supports three network modes: static ip network parameters must be entered manually and would not...
[ 键入文字 ] 20 / 43 field name explanation vpn ip address shows the current vpn ip address. Vpn mode enable vpn enable/disable vpn. L2tp select layer 2 tunneling protocol openvpn select openvpn protocol. (only one protocol may be activated. After the selection.
[ 键入文字 ] 21 / 43 is made, the configuration should be saved and the phone be rebooted.) layer 2 tunneling protocol (l2tp) l2tp server address set vpn l2tp server ip address. Authentication name set user name access to vpn l2tp server. Authentication password set password access to vpn l2tp server. O...
[ 键入文字 ] 22 / 43 sip field name explanation basic settings (choose the sip line to configured) line status display the current line status at page loading. To get the up to date line status, user has to refresh the page manually..
[ 键入文字 ] 23 / 43 username enter the username of the service account. Display name enter the display name to be sent in a call request. Authentication name enter the authentication name of the service account authentication password enter the authentication password of the service account activate wh...
[ 键入文字 ] 24 / 43 to a conference room on the server server conference number set the conference room number when conference type is set to be server transfer timeout set the timeout of call transfer process enable long contact allow more parameters in contact field per rfc 3840 use quote in display ...
[ 键入文字 ] 25 / 43 enable prack set the line to support prack sip message enable dns srv set the line to use dns srv which will resolve the fqdn in proxy server into a service list auto change port enable/disable auto change port keep authentication keep the authentication parameters from previous aut...
[ 键入文字 ] 26 / 43 basic settings field name explanation sip settings local sip port set the local sip port used to send/receive sip messages. Registration failure retry interval set the retry interval of sip registration when registration failed. Enable strict ua match enable or disable strict ua mat...
[ 键入文字 ] 27 / 43 features field name explanation basic settings enable dnd dnd feature can refuse all incoming calls for all sip lines, or for individual sip line. But the outgoing calls would not be affected ban outgoing if it is enabled, no outgoing calls can be made. Enable intercom mute if it is...
[ 键入文字 ] 28 / 43 audio setting field name explanation first codec the first codec choice: g.711a/u, g.722, g.723.1, g.726-32, g.729ab second codec the second codec choice: g.711a/u, g.722, g.723.1, g.726-32, g.729ab, none third codec the third codec choice: g.711a/u, g.722, g.723.1, g.726-32, g.729a...
[ 键入文字 ] 29 / 43 speaker the load speaker has two modes of selection: "panel speaker" or "external speaker"."panel speaker" refers to the speaker and mic are installed in the same shell, it is used for voice intercom, requires to get better two-way talking, so the audio output power need to be optim...
[ 键入文字 ] 30 / 43 camera connect settings field name explanation connect mode local: connect the original camera external: connect to other manufacturers camera video capture (local mode) ircut mode auto: ircut switches according to the actual ambient light level of the camera synchronization: the sw...
[ 键入文字 ] 31 / 43 compensation autofill sensitivity in the environment changes in light and shade, the higher the sensitivity the faster the video changes video encode (local mode) field name explanation encode format only h.264 encoding format is supported resolution main stream: support 720p sub-st...
[ 键入文字 ] 32 / 43 connection mode select external, click [apply], restart the device ip camera settings (external mode) field name explanation user name external camera login required account password external camera login password required camera type select the camera manufacturers ip address ip ad...
[ 键入文字 ] 33 / 43 it is easy and convenient to use multicast function to send notice to each member of the multicast via setting the multicast key on the device and sending multicast rtp stream to pre-configured multicast address. By configuring monitoring multicast address on the device, the device ...
[ 键入文字 ] 34 / 43 web settings: the multicast ss priority is higher than that of ee; ss has the highest priority. Note: when you press the multicast key for multicast session, both multicast sender and receiver would beep. Listener configuration blue part (name) "group 1","group 2" and "group 3" are ...
[ 键入文字 ] 35 / 43 than 3; multicast 1 priority is set up with 2, higher than ordinary call priority, device can answer the multicast message, at the same time, holding the other call. Green part (enable page priority) set whether to open multicast comparison function, multicast priority is pink part ...
[ 键入文字 ] 36 / 43 url for various actions performed by the phone. These actions are recorded and sent as xml files to the server. Sample format is http://internalserver /filename.Xml f) time/date time/date field name explanation network time server settings time synchronized via sntp enable time-sync...
[ 键入文字 ] 37 / 43 12-hour clock set the time display in 12-hour mode date format select the time/date display format daylight saving time settings location select the user's time zone according to specific area dst set type select automatic dst according to the preset rules of dst, or you can manuall...
[ 键入文字 ] 38 / 43 field name field name input settings input detect enable or disable input detect trigger mode when choosing the low level trigger (closed trigger), detect the input port (low level) closed trigger. When choosing the high level trigger (disconnected trigger), detect the input port (h...
[ 键入文字 ] 39 / 43 call state trigger the port output continuous time synchronization and trigger state changes, including the trigger conditions. Four models, such as: call trigger output port, will be in a call state to continue to respond) 1, taking; 2, taking and ringing; 3, ringing; 4,call. Serve...
[ 键入文字 ] 40 / 43 hot key you might enter the phone number in the input box. When you press the shortcut key, equipment would dial preset telephone number. This button can also be used to set the ip address: you can press the shortcut key to directly make a ip call. Type number line subtype usage hot...
[ 键入文字 ] 41 / 43 operation mechanism you can define the function key configuration with multicast address, port and used codec. The device can configure via web to monitor the multicast address and port. When the device make a multicast, all devices monitoring the address can receive the multicast d...
[ 键入文字 ] 42 / 43 v. Appendix 1. Technical parameters communication protocol sip 2.0(rfc-3261) main chipset broadcom speech flow protocols rtp decoding g.729 、 g.723 、 g.711 、 g.722 、 g.726 wan 10/100base-tx s auto-mdix, rj-45 mic(optional) speaker audio line signal output impedance 32 ohm sensitivit...
[ 键入文字 ] 43 / 43 external power supply supports two lines rtsp button or remote volume adjustment switch signal input and output talkback recording output default auto answer dynamic multicast function support for function key interface support monophonic active speakers.