Fundamental acoustic research owners manual lbe 10 a 1 owner’s manual active subwoofer lbe 10 a.
Fundamental acoustic research owners manual lbe 10 a 2 thank you for choosing the far lbe 10 a subwoofer. In order to obtain the best performance from this active subwoofer, please be sure to read this owner’s manual and use your speaker only in accordance with its instruction. Contents • applicatio...
Fundamental acoustic research owners manual lbe 10 a 3 thank you for choosing a far active subwoofer. This unit is an exceptional product that will give you years of superb performance. Do not open the cabinet. Do not attempt to service this unit. Tampering with internal components can cause fire or...
Fundamental acoustic research owners manual lbe 10 a 4 technical description lbe 10 a sensitivity db spl maximum pressure level (2 cabinets @ 1 m) 112 frequency range hz ± 3 db 35-80 / 120 active filter low pass section crossover frequency 80/120 hz 24 db/octave limiter (on/off) +2db components woof...
Fundamental acoustic research owners manual lbe 10 a 5 characteristics power bandwidth 20 - 25000 hz slew rate 35 v/µs sn ratio > 100 db distortion intermodulation 0,01% total 0,05% input sensitivity 0 db impedance > 10 kohm connectors input (symmetric) xlr & jack link xlr remote rj-45 external dime...
Fundamental acoustic research owners manual lbe 10 a 6 technical drawing legend 1. Main level tuning 2. Limiter function 3. Link 4. Input xlr 5. Frequency adjustment 6. Cooling system 7. Mains 8. Power 9. Phase adjustment 10. Input/output for level remote control.
Fundamental acoustic research owners manual lbe 10 a 7 fine frequency tuning for maximum efficiency use the switches on the rear panel. One for the phase adjustment (figure 1) and one for the frequency adjustment (figure 2). Phase adjustment the switch can be set to one of the two positions for an o...
Fundamental acoustic research owners manual lbe 10 a 8 limiter function the lbe 10 a has a built in limiter developed to protect the drivers against harmful signals. The limiter acts directly on the input signal by decreasing it when it reaches the clipping level. To activate the limiter turn it to ...
Fundamental acoustic research owners manual lbe 10 a 9 this section is designed to trouble free technical operation. Most of the problems encountered by the users are due to operating mistakes .Please check this list first for a possible solution. If the problem persists, consult your local far dist...
