Far South Networks Com.X20 Quick Start Manual - page 2
Copyright © 2008-2014 Far South Networks (Pty) Ltd
ComX rear view IO port definition#
• ''Base(Tx Ethernet# LAN =Eth> LAN =Eth> LAN* =Eth> ? LAN, =Eth*>
• Power# Vac'0Hz
• Serial port# COM
• USB# USB, USB0 USB/ ? USBD
• PS' Keyboard mouse
• VGA
Hardware Installation
The ComX host server is powered using the AC power cable included with your server Connect the
power cable to V'0Hz mains power supply and turn the server on
Connect any Comma iTA units to available LAN ports =Eth Eth Eth*> using Cat0e Ethernet cables
* Connect the ComX host server to the LAN switch using the first Ethernet port =Eth> and a standard
Cat0e cable
Accessing the Com.X20 Host Server
•
Default access details for the ComX is#
user: comma
password: farsouth
•
The ComX server GUI can be accessed using the url http#''FipG where FipG is the IP addressed
assigned to the unit via DHCP or one of the statically configured IP%s All administrative tasks elaborated on
below can be performed from the GUI Please refer to the Administrator%s guide for more detail
•
The ComX server can also be accessed via its serial port using a null(modem cable with the following
settings#
baud rate: 115200
data bits: 8